{"title":"Sports Sprinklers","description":"\u003cp class=\"collection-intro\"\u003eFind sprinklers and rotors for watering sports turf and larger lawns or grass areas. Compare models by their intended coverage, connections and operating information.\u003c\/p\u003e\n\u003cdetails class=\"collection-buying-guide\"\u003e\u003csummary\u003eHelp choosing Sports Sprinklers\u003c\/summary\u003e\u003cdiv\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMatch the sprinkler radius and nozzle to the measured supply and layout. Check whether the product is a complete sprinkler or a replacement component.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the area, planting and watering pattern to the product's intended use.\u003c\/li\u003e\n\u003cli\u003eCompare the listed flow and operating pressure with your measured water supply.\u003c\/li\u003e\n\u003cli\u003eCheck connection sizes and whether nozzles, adaptors or other parts are included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExplore this range\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hunter-i25-6-inch-pop-up-rotor-with-check-valve\"\u003eHunter I-25-06 6-inch Plastic Riser Rotor with Check Valve, 1-inch BSP\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hunter-i20\"\u003eHunter I20\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hunter-i20-box-x20-copy\"\u003eHunter I20 Box x20\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUseful guidance\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003eChoosing sprinklers and nozzles\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eCheck the selected product page for dimensions, available variants, what is included and current delivery information. If you are unsure, send the product reference and clear photographs of the existing part through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n","products":[{"product_id":"rega-rainking-travelling-sprinkler","title":"Rega Rainking - Travelling Sprinkler","description":"\u003ch2\u003eSelf-travelling sprinkler for large turf areas\u003c\/h2\u003e\u003cp\u003eThe Rega Rainking is a turbine-driven travelling sprinkler for sports grounds, parks, greens, nurseries and other large turf areas. A steel cable guides the unit along the run, with automatic water shut-off at the end.\u003c\/p\u003e\u003ch3\u003ePerformance and connections\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical coverage:\u003c\/strong\u003e up to 38 m wide and 175 m long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel cable:\u003c\/strong\u003e 135 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel speed:\u003c\/strong\u003e 9–25 m\/h, depending on operating pressure and drive nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum design point:\u003c\/strong\u003e 4 m³\/h at 3 bar at the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e ¾-inch BSP female thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended supply hose:\u003c\/strong\u003e 1-inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable coverage depends on nozzle, pressure and flow at the machine. Confirm that the water supply can deliver both 3 bar and 4 m³\/h after hose losses; a normal garden tap may be insufficient. The connecting hose and adaptor are not stated as included with this standalone sprinkler.\u003c\/p\u003e\n\u003cdiv class=\"ukfc-thread-help\" style=\"margin-top:20px;padding:14px 16px;border-left:4px solid #6b3fa0;border-radius:8px;background:#f3edfc;color:#38234f;\"\u003e\n\u003cstrong style=\"display:block;margin-bottom:5px;\"\u003eUnsure which thread you need?\u003c\/strong\u003e\u003ca href=\"\/pages\/bsp-npt-acme-thread-guide\" style=\"color:#593080;text-decoration:underline;font-weight:600;\"\u003eRead our BSP, NPT \u0026amp; ACME thread buyer’s guide\u003c\/a\u003e\u003cspan style=\"display:block;margin-top:5px;\"\u003eCheck the thread type, size and seal before ordering.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eWater-powered travelling sprinkler for a suitable large-turf watering layout. Verify available flow, operating pressure and supplied hose\/accessories.\u003c\/p\u003e","brand":"Rega Rainking","offers":[{"title":"Default Title","offer_id":54732063834450,"sku":"69K25-00","price":1471.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RegaRainking-TravellingSprinkler.jpg?v=1789494413"},{"product_id":"rain-bird-6504-fc-pc-rotors-falcon","title":"Rain Bird Falcon 6504 FC\/PC Rotors","description":"\u003cp\u003eThe Rain Bird Falcon 6504 is a 1-inch gear-drive rotor for sports turf and other large irrigated areas. Choose a full-circle (FC) or adjustable part-circle (PC) model, with standard or stainless-steel riser options as listed.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e approximately 11.9 to 19.8 m, depending on nozzle, pressure and adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 0.66 to 4.93 m³\/h.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e 2.1 to 6.2 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up height:\u003c\/strong\u003e 102 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 1-inch female threaded inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzles:\u003c\/strong\u003e selected variants include Rain Curtain nozzle sizes 10, 12, 14, 16 and 18.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing a variant\u003c\/h3\u003e\n\u003cp\u003eSelect FC for continuous 360° rotation or PC where an adjustable arc is required. Stainless-steel riser variants are intended for installations needing added riser durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Confirm the required inlet thread standard and available operating pressure before ordering. Radius and flow vary with the fitted nozzle and site pressure.\u003c\/p\u003e\n\u003cdiv class=\"ukfc-thread-help\" style=\"margin-top:20px;padding:14px 16px;border-left:4px solid #6b3fa0;border-radius:8px;background:#f3edfc;color:#38234f;\"\u003e\n\u003cstrong style=\"display:block;margin-bottom:5px;\"\u003eUnsure which thread you need?\u003c\/strong\u003e\u003ca href=\"\/pages\/bsp-npt-acme-thread-guide\" style=\"color:#593080;text-decoration:underline;font-weight:600;\"\u003eRead our BSP, NPT \u0026amp; ACME thread buyer’s guide\u003c\/a\u003e\u003cspan style=\"display:block;margin-top:5px;\"\u003eCheck the thread type, size and seal before ordering.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Rain Bird Falcon 6504 1-inch gear drive PC Sprinkler SS riser with nozzles 10-18","offer_id":54732066586962,"sku":"B6","price":67.93,"currency_code":"GBP","in_stock":true},{"title":"Rain Bird Falcon 6504 1-inch gear drive FC Sprinkler SS riser with nozzles 10-18","offer_id":54732066619730,"sku":"B6581","price":54.22,"currency_code":"GBP","in_stock":true},{"title":"Rain Bird Falcon 6504 1-inch gear drive FC Sprinkler\/w nozzles 10,12,14,16,18","offer_id":54732066652498,"sku":"B6","price":67.93,"currency_code":"GBP","in_stock":true},{"title":"Rain Bird Falcon 6504 1-inch gear drive PC Sprinkler with nozzles 10,12,14,16,18","offer_id":54732066685266,"sku":"B","price":54.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/rain-bird-falcon-6504-fc-pc-rotors_71fb5263-a001-4563-a689-2a2b3be78a94.jpg?v=1795080285"},{"product_id":"i-90-turf-cup-kit","title":"I-90 Turf Cup Kit","description":"\u003ch2\u003eHunter 467955SP turf cup conversion for I-90 rotors\u003c\/h2\u003e\u003cp\u003eThe 467955SP kit converts a compatible Hunter I-90 rotor to a turf-cup model. It retains natural turf over the visible top of the head, helping the sprinkler sit more discreetly within football pitches, cricket outfields, golf areas and other maintained playing surfaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHunter part:\u003c\/strong\u003e 467955SP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Hunter I-90 rotors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e turf cup conversion kit only; the rotor is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the kit to the exact rotor before ordering and retain safe access for maintenance. See our \u003ca href=\"\/pages\/pop-up-sprinkler-installation-height-finished-grade\"\u003efinished-grade installation guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eModel-specific accessory for a turf finish over the visible sprinkler top. Select the exact rotor family.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732096045394,"sku":"467955SP.1","price":45.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/i-90-turf-cup-kit-800x800.jpg?v=1789494587"},{"product_id":"i-80-turf-cup-kit","title":"I-80 Turf Cup Kit","description":"\u003ch2\u003eHunter 959400SP turf cup for compatible I-80 rotors\u003c\/h2\u003e\u003cp\u003eThis model-specific kit converts a compatible Hunter I-80 rotor to a turf-cup finish, allowing natural turf to be retained over the visible top of the sprinkler. It is useful on football pitches, cricket outfields, golf areas and other maintained playing surfaces where a discreet finish matters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHunter part:\u003c\/strong\u003e 959400SP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Hunter I-80 rotor family only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e user-installed kit; the rotor is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the exact I-80 model before ordering. Finished level and access for servicing still matter after the cup is fitted; see the \u003ca href=\"\/pages\/pop-up-sprinkler-installation-height-finished-grade\"\u003efinished-grade installation guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eModel-specific accessory for a turf finish over the visible sprinkler top. Select the exact rotor family.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732096078162,"sku":"959400SP.1","price":76.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/I-40TurfCupKit_3839d3e5-71b3-4827-98d0-e0673e346c52.jpg?v=1789494588"},{"product_id":"i-40-turf-cup-kit","title":"I-40 Turf Cup Kit","description":"\u003ch2\u003eHunter turf cup kit for compatible I-40 rotors\u003c\/h2\u003e\u003cp\u003eThis model-specific kit fits Hunter I-40 adjustable and opposing-nozzle rotors. It allows turf to be retained over the visible top of the head, helping the sprinkler blend into golf, sports-turf and large managed-landscape surfaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e compatible Hunter I-40 standard and opposing-nozzle models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e turf cup kit only; the rotor is not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e discreet playing-surface finish while retaining service access.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the installed I-40 model before ordering. Use the \u003ca href=\"\/pages\/pop-up-sprinkler-installation-height-finished-grade\"\u003efinished-grade installation guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e to set the head at the correct level and support the connection.\u003c\/p\u003e\n\u003cp\u003eModel-specific accessory for a turf finish over the visible sprinkler top. Select the exact rotor family.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732096110930,"sku":"TURFCUPKIT I-40.1","price":36.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/i-40-turf-cup-kit-800x800.jpg?v=1789494589"},{"product_id":"hunter-i25-6-inch-pop-up-rotor-with-check-valve","title":"Hunter I-25-06 6-inch Plastic Riser Rotor with Check Valve, 1-inch BSP","description":"\u003cp\u003e\u003cstrong\u003ePre-order: normally dispatched in 3–5 working days.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eHunter I-25-06 15 cm Plastic-Riser Commercial Turf Rotor\u003c\/h2\u003e\n\u003cp\u003eThe Hunter I-25-06 combines a taller 15 cm pop-up with the I-25's adjustable commercial-rotor mechanism. It is intended for large lawns, parks, commercial landscapes and general sports-turf areas where the extra pop-up height is useful. This listing is the plastic-riser model, not the stainless-steel I-25-06-SS.\u003c\/p\u003e\n\u003ch3\u003eExact configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Hunter I-25-06\u003c\/li\u003e\n\u003cli\u003ePop-up height: 15 cm (6-inch)\u003c\/li\u003e\n\u003cli\u003ePlastic riser\u003c\/li\u003e\n\u003cli\u003eAdjustable arc: 50° to 360°\u003c\/li\u003e\n\u003cli\u003eRadius: 11.9 to 21.6 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003eFlow: 0.82 to 7.24 m³\/h (13.6 to 120.7 L\/min)\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2.5 to 7.0 bar\u003c\/li\u003e\n\u003cli\u003eInlet: 1-inch BSP female thread\u003c\/li\u003e\n\u003cli\u003eBuilt-in drain check valve, rated by Hunter for up to 3 m of elevation\u003c\/li\u003e\n\u003cli\u003eFive standard nozzles included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSelection and connection\u003c\/h3\u003e\n\u003cp\u003eSelect the nozzle from Hunter's I-25 performance chart using the required radius, measured operating pressure and available flow. The inlet needs a compatible 1-inch BSP male connection. Size and support the swing joint for the installed depth and set the rotor top correctly at finished grade.\u003c\/p\u003e\n\u003ch3\u003eIrri Hub guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eBSP, BSPT and NPT irrigation thread identification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eSwing-joint selection and sprinkler riser support\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/sprinkler-check-valves-low-head-drainage\"\u003eSprinkler check valves and low-head drainage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732097421650,"sku":"HUNSPR-I2506PC-CV","price":69.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/hunter-i25-6-inch-pop-up-rotor-square.png?v=1789494604"},{"product_id":"toro-t7-rotor","title":"Toro T7 Rotor","description":"\u003cp\u003eThe Toro T7 is a 127 mm pop-up, part-circle large-turf rotor with top arc indication, a check valve and Smart Arc memory. Toro publishes adjustment from 45° to 360° for this international family.\u003c\/p\u003e\u003ch3\u003eExact options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eT7P-52:\u003c\/strong\u003e nominal 1-inch BSP connection, plastic riser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT7PSS-52:\u003c\/strong\u003e nominal 1-inch BSP connection, stainless-steel riser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT7PSS-42:\u003c\/strong\u003e nominal 1-inch ACME connection, stainless-steel riser\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBSP and ACME are different connections. Match the SKU and existing swing-joint outlet; do not order by nominal diameter alone. See \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eBSP, BSPT and NPT irrigation thread identification\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Toro","offers":[{"title":"T7P SPRINKLER P\/C 1-inch BSP PLASTIC RISER","offer_id":54732135203154,"sku":"T7P-52","price":63.82,"currency_code":"GBP","in_stock":true},{"title":"T7P SPRINKLER P\/C 1-inch BSP STAINLESS STEEL RISER","offer_id":54732135235922,"sku":"T7PSS-52","price":81.73,"currency_code":"GBP","in_stock":true},{"title":"T7P SPRINKLER P\/C 1-inch ACME STAINLESS STEEL RISER","offer_id":54732135268690,"sku":"T7PSS-42","price":81.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/ToroT7Rotorvvv.jpg?v=1789494866"},{"product_id":"toro-flex-series-bodies-acme-bsp-inlet-1-11-2-body","title":"TORO Flex Series Bodies ACME \u0026 BSP Inlet 1-inch \u0026 1½-inch Body","description":"\u003cp\u003eToro FLEX golf-rotor body assemblies offered in eight exact connection and control combinations. The riser\/internal is selected separately.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFLX30-46-1 \/ -4: nominal 25 mm ACME, AC or DC-latching\u003c\/li\u003e\n\u003cli\u003eFLX30-56-1 \/ -4: nominal 25 mm BSP, AC or DC-latching\u003c\/li\u003e\n\u003cli\u003eFLX50-46-1 \/ -4: nominal 40 mm ACME, AC or DC-latching\u003c\/li\u003e\n\u003cli\u003eFLX50-56-1 \/ -4: nominal 40 mm BSP, AC or DC-latching\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDo not substitute BSP for ACME. Match inlet, control type and riser family by full SKU. See \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eBSP, BSPT and NPT irrigation thread identification\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eGolf irrigation rotor body. Match the body size, inlet standard and electrical control option to the full product code.\u003c\/p\u003e","brand":"Toro","offers":[{"title":"FLEX 1-inch ACME BODY AC COIL","offer_id":54732140511570,"sku":"FLX30-46-1","price":141.57,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1-inch ACME BODY DC LATCHING COIL","offer_id":54732140544338,"sku":"FLX30-46-4","price":154.52,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1-inch BSP BODY AC COIL","offer_id":54732140577106,"sku":"FLX30-56-1","price":141.57,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1-inch BSP BODY DC LATCHING COIL","offer_id":54732140609874,"sku":"FLX30-56-4","price":154.52,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1½-inch ACME BODY AC COIL","offer_id":54732140642642,"sku":"FLX50-46-1","price":157.38,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1½-inch ACME BODY DC LATCHING COIL","offer_id":54732140675410,"sku":"FLX50-46-4","price":173.46,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1½-inch BSP BODY AC SOLENOID COIL","offer_id":54732140708178,"sku":"FLX50-56-1","price":157.38,"currency_code":"GBP","in_stock":true},{"title":"FLEX 1½-inch BSP BODY DC LATCHING COIL","offer_id":54732140740946,"sku":"FLX50-56-4","price":173.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/TOROFlexSeriesBodiesACME_BSPInlet1_112Body3.png?v=1789494873"},{"product_id":"hunter-i40-opposing-nozzle-pack","title":"Hunter I40 Opposing Nozzle Pack","description":"\u003ch2\u003eGenuine Hunter 462459 nozzle pack for I-40 rotors\u003c\/h2\u003e\u003cp\u003eThis is Hunter's replacement nozzle pack for compatible I-40 rotor servicing. It provides a model-specific route for restoring or changing nozzle duty without substituting an unverified generic part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHunter part:\u003c\/strong\u003e 462459. Confirm the exact I-40 model and the nozzle duty required by the hydraulic design before ordering; the live manufacturer record identifies the pack for I-40 but does not publish the individual nozzle contents on that product page.\u003c\/p\u003e\u003cp\u003eNozzle changes alter flow, radius and precipitation, so recommission the head after fitting. Use the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e when checking the revised duty.\u003c\/p\u003e\n\u003cp\u003eReplacement irrigation nozzle. Select the exact pattern and radius option; the sprinkler body is separate.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732140773714,"sku":"462459","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI40OpposingNozzlePack.jpg?v=1789494874"},{"product_id":"hunter-i40-6-stainless-steel-with-opposing-nozzle","title":"Hunter i40 6-inch Stainless Steel with opposing nozzle","description":"\u003ch2\u003eHunter I-40 full-circle rotor with a 15 cm stainless riser\u003c\/h2\u003e\u003cp\u003eThis version combines the I-40 opposing-nozzle full-circle pattern with a deeper 15 cm pop-up. It suits designed sports-turf and large-landscape positions where the head must rise above longer turf or a deeper installation while retaining a protected stainless-steel riser.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e full circle with opposing nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 15.2–23.2 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 45.8–129.4 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure range:\u003c\/strong\u003e 2.5–7.0 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 15 cm stainless-steel riser with check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm finished level, nozzle duty and swing-joint support before installation. Use the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732151062866,"sku":"I4006SSON","price":120.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/Hunteri406StainlessSteelwithopposingnozzle2.jpg?v=1789494910"},{"product_id":"hunter-i40-6-stainless-steel","title":"Hunter i40 6-inch Stainless Steel","description":"\u003ch2\u003eHunter I-40 with 15 cm riser for deep-set commercial turf installations\u003c\/h2\u003e\u003cp\u003eThis I-40 combines an adjustable large-turf rotor with a 15 cm stainless-steel riser. The extra pop-up height is useful where the sprinkler must clear longer turf or a deeper finished-grade position in sports grounds, parks and demanding commercial landscapes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable from 50° to 360°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 13.1–21.3 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 27.2–114.1 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure range:\u003c\/strong\u003e 2.5–7.0 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 15 cm stainless-steel riser with check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse nozzle data and the available dynamic pressure to select the duty; do not size by radius alone. Our \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e cover the main design checks.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732151193938,"sku":"I-40-06-SS-B","price":111.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/Hunteri406StainlessSteel3.jpg?v=1789494911"},{"product_id":"hunter-i40-rear-nozzle-360-arc","title":"Hunter i40 \u0026 Rear Nozzle 360 arc","description":"\u003ch2\u003eHunter I-40 opposing-nozzle rotor for full-circle large-turf coverage\u003c\/h2\u003e\u003cp\u003eThis 10 cm I-40 is the opposing-nozzle version for full-circle coverage in sports grounds, parks and large commercial landscapes. It is the right branch of the I-40 family when a 360° pattern is required rather than an adjustable part-circle arc.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e full circle with opposing nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 15.2–23.2 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 45.8–129.4 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure range:\u003c\/strong\u003e 2.5–7.0 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 10 cm stainless-steel riser with check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect the nozzle against the designed flow, dynamic pressure and spacing. See the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732151226706,"sku":"HSI40-04SSO","price":111.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/031-hunter-i40-rear-nozzle-360-arc.jpg?v=1789494912"},{"product_id":"hunter-i40","title":"Hunter i40","description":"\u003ch2\u003eHunter I-40 adjustable rotor for sports grounds and large landscapes\u003c\/h2\u003e\u003cp\u003eThe standard 10 cm I-40 is a robust adjustable rotor for sports grounds, parks and demanding commercial landscapes. Its stainless-steel riser, check valve, automatic arc return and non-strippable drive are aimed at sites where heads face regular use and maintenance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable from 50° to 360°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 13.1–21.3 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 27.2–114.1 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure range:\u003c\/strong\u003e 2.5–7.0 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 10 cm stainless-steel riser with check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose the nozzle from the available hydraulic duty and use head-to-head spacing rather than radius alone. See the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732151259474,"sku":"HUNSPR-I4004-SS-CV","price":97.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/030-hunter-i40.jpg?v=1789494913"},{"product_id":"hunter-turf-cup-kit","title":"Hunter Turf Cup Kit","description":"\u003ch2\u003eModel-specific Hunter turf cups for I-40, I-80 and I-90 rotors\u003c\/h2\u003e\u003cp\u003eThis listing groups three different Hunter turf-cup kits. Each retains turf over the visible top of a compatible rotor to create a more discreet finish on golf areas, football pitches, cricket outfields and other maintained playing surfaces.\u003c\/p\u003e\u003ch3\u003eSelect by rotor family\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTURFCUPKIT I-40:\u003c\/strong\u003e for compatible I-40 adjustable and opposing-nozzle models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e959400SP:\u003c\/strong\u003e for compatible I-80 rotors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e467955SP:\u003c\/strong\u003e for compatible I-90 rotors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kits are not interchangeable and the rotor is not included. Confirm the installed rotor model before ordering, then retain safe maintenance access and correct finished level using the \u003ca href=\"\/pages\/pop-up-sprinkler-installation-height-finished-grade\"\u003efinished-grade installation guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eModel-specific accessory for a turf finish over the visible sprinkler top. Select the exact rotor family.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"I-40 Turf Cup Kit","offer_id":54732151292242,"sku":"TURFCUPKIT I-40","price":36.99,"currency_code":"GBP","in_stock":true},{"title":"I-80 Turf Cup Kit","offer_id":54732151325010,"sku":"959400SP","price":76.08,"currency_code":"GBP","in_stock":true},{"title":"I-90 Turf Cup Kit","offer_id":54732151357778,"sku":"467955SP","price":52.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/029-hunter-turf-cup-kit.jpg?v=1789494913"},{"product_id":"hunter-no-bounce-turf-cup-kit-for-tts-800-series-golf-rotors","title":"Hunter No Bounce Turf Cup Kit for TTS-800 Series Golf Rotors","description":"\u003ch2\u003eHunter 987100SP No-Bounce Turf Cup Kit\u003c\/h2\u003e\u003cp\u003eThis genuine Hunter accessory is the No-Bounce Turf Cup Kit for TTS-800 Series golf rotors. It is supplied as one kit and provides the cushioned, slip-resistant exposed surface specified for this rotor family.\u003c\/p\u003e\u003ch3\u003eIdentification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHunter part number:\u003c\/strong\u003e 987100SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct family:\u003c\/strong\u003e Rubber Cover Kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e TTS-800 Series golf rotors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e one kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the part number and rotor series before ordering. This is an accessory kit, not a complete rotor.\u003c\/p\u003e\n\u003cp\u003eModel-specific No Bounce cover kit for TTS-800 golf rotors.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732151783762,"sku":"987100SP","price":120.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterNoBounceTurfCupKitforTTS-800SeriesGolfRotors2_a113609b-5c86-413d-b2f3-811c1af2826f.jpg?v=1789494918"},{"product_id":"hunter-i90-full-circle","title":"Hunter I90 Full Circle","description":"\u003ch2\u003eHunter I-90-36V for long-range full-circle turf irrigation\u003c\/h2\u003e\u003cp\u003eThe I-90-36V is the opposing-nozzle, full-circle member of Hunter's long-range I-90 family. It suits designed pitch-perimeter positions, cricket outfields, parks and broad natural-turf areas where wide 360° coverage is required and the water supply can meet the duty.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e fixed full circle with opposing nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 22.3–31.4 m, depending on nozzle and pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 115.5–315.3 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended pressure:\u003c\/strong\u003e 5.5–8.3 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1½-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 8 cm with check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe optional I-90 turf cup supports a more discreet finish in playing surfaces. Long throw does not replace hydraulic design: confirm nozzle duty, dynamic pressure and spacing through the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732152570194,"sku":"HSI90-36V","price":155.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/hunter-i90-full-circle-800.jpg?v=1789494922"},{"product_id":"hunter-i90-adjustable-arc","title":"Hunter I90 Adjustable Arc","description":"\u003ch2\u003eHunter I-90 adjustable rotor for large sports fields and outfields\u003c\/h2\u003e\u003cp\u003eThe adjustable I-90 is built for long-distance irrigation of natural turf, including large football layouts, cricket outfields, parks and open public spaces. It is best considered where the hydraulic design can support the higher flow and pressure required by a long-range rotor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable from 40° to 360°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 20.1–30.0 m, depending on nozzle and pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 111.7–317.2 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended pressure:\u003c\/strong\u003e 5.5–8.3 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1½-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 8 cm with a cushioned rubber cover and check valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA model-specific turf cup kit is available where the rotor needs to sit discreetly within natural turf. Confirm available flow, dynamic pressure and head-to-head spacing using the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732153454930,"sku":"HSI90-ADV","price":155.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/hunter-i90-adjustable-arc-800.jpg?v=1789494923"},{"product_id":"hunter-i80-full-circle","title":"Hunter I80 Full Circle","description":"\u003ch2\u003eHunter I-80 opposing-nozzle rotor for full-circle sports coverage\u003c\/h2\u003e\u003cp\u003eThe I-80-ON is the dedicated full-circle version of Hunter's large sports-turf rotor. Opposing nozzles spread the duty around a 360° pattern, making it relevant to designed in-pitch football irrigation, cricket outfields and other large turf areas where a full-circle head is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e fixed full circle with opposing nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 19.2–29.6 m, depending on nozzle and pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 4.9–13.3 m³\/h (81.8–221.4 L\/min).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended pressure:\u003c\/strong\u003e 3.4–6.9 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1½-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 10 cm stainless-steel riser.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTotal-Top-Service access and the optional I-80 turf cup support maintainable, discreet playing-surface installations. Use the \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e before fixing the final layout.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732154110290,"sku":"HSI80-04-SSO","price":164.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI80FullCircle.jpg?v=1789494923"},{"product_id":"hunter-i80-adjustable-arc","title":"Hunter I80 Adjustable Arc","description":"\u003ch2\u003eHunter I-80 adjustable rotor for in-pitch sports turf\u003c\/h2\u003e\u003cp\u003eThis adjustable I-80 is a high-capacity sports-turf rotor for designed irrigation within football pitches, cricket outfields and other large natural-turf areas. Hunter's Total-Top-Service construction lets the working assembly be serviced from above, while the stainless-steel riser and check valve suit demanding managed-turf installations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable from 70° to 360°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 19.8–28.7 m, depending on nozzle and pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 4.6–13.5 m³\/h (76.5–225.6 L\/min).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended pressure:\u003c\/strong\u003e 3.4–6.9 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1½-inch BSP female inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up:\u003c\/strong\u003e 10 cm stainless-steel riser.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA matching I-80 turf cup can be used where the head needs to blend into the playing surface. Final spacing, nozzle and swing-joint selection must come from the hydraulic design. See our \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003esprinkler spacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet and connection guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint and riser-support guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732155683154,"sku":"HSI80-04-SS","price":153.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI80AdjustableArc.jpg?v=1789494925"},{"product_id":"hunter-i25-plastic-riser","title":"Hunter I25 Plastic Riser","description":"\u003ch2\u003eHunter I-25 10 cm Plastic-Riser Commercial Turf Rotor\u003c\/h2\u003e\n\u003cp\u003eThis Hunter I-25 is a high-capacity commercial rotor for large lawns, parks, commercial landscapes and general sports-turf areas. The 10 cm plastic riser provides the standard I-25 body format, with one adjustable mechanism covering part-circle and full-circle duties.\u003c\/p\u003e\n\u003ch3\u003eExact configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel family: Hunter I-25-04\u003c\/li\u003e\n\u003cli\u003ePop-up height: 10 cm (4-inch)\u003c\/li\u003e\n\u003cli\u003ePlastic riser\u003c\/li\u003e\n\u003cli\u003eAdjustable arc: 50° to 360°\u003c\/li\u003e\n\u003cli\u003eRadius: 11.9 to 21.6 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003eFlow: 0.82 to 7.24 m³\/h (13.6 to 120.7 L\/min)\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2.5 to 7.0 bar\u003c\/li\u003e\n\u003cli\u003eInlet: 1-inch BSP female thread\u003c\/li\u003e\n\u003cli\u003eBuilt-in drain check valve, rated by Hunter for up to 3 m of elevation\u003c\/li\u003e\n\u003cli\u003eFive standard nozzles included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing and installing the rotor\u003c\/h3\u003e\n\u003cp\u003eSelect the nozzle from Hunter's I-25 performance chart using the measured operating pressure, required radius and available flow. Include the combined demand of every rotor on the zone and the pipework pressure losses. This listing is the plastic-riser version; choose the stainless-steel listing where that exact riser construction is required.\u003c\/p\u003e\n\u003ch3\u003eIrri Hub guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eBSP, BSPT and NPT irrigation thread identification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eSwing-joint selection and sprinkler riser support\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/sprinkler-check-valves-low-head-drainage\"\u003eSprinkler check valves and low-head drainage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732155715922,"sku":"HUNSPR-I2504PC-CV","price":40.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/hunter-i25-plastic-riser-800.jpg?v=1789494925"},{"product_id":"hunter-i25-box-amount-x12","title":"Hunter I25 Box Amount x12","description":"\u003ch2\u003eHunter I-25 10 cm Stainless-Steel Rotors: Trade Box of 12\u003c\/h2\u003e\n\u003cp\u003eThis listing is a trade box of 12 Hunter I-25 commercial rotors for larger installations using the same 10 cm stainless-steel configuration throughout. The I-25 is intended for large irrigated turf, including parks, commercial landscapes and general sports-turf areas. It is not presented here as an in-pitch football or cricket sprinkler.\u003c\/p\u003e\n\u003ch3\u003eEach rotor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel family: Hunter I-25-04-SS\u003c\/li\u003e\n\u003cli\u003ePop-up height: 10 cm (4-inch)\u003c\/li\u003e\n\u003cli\u003eStainless-steel riser\u003c\/li\u003e\n\u003cli\u003eAdjustable arc: 50° to 360°\u003c\/li\u003e\n\u003cli\u003eRadius: 11.9 to 21.6 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003eFlow: 0.82 to 7.24 m³\/h (13.6 to 120.7 L\/min)\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2.5 to 7.0 bar\u003c\/li\u003e\n\u003cli\u003eInlet: 1-inch BSP female thread\u003c\/li\u003e\n\u003cli\u003eBuilt-in drain check valve, rated by Hunter for up to 3 m of elevation\u003c\/li\u003e\n\u003cli\u003eFive standard nozzles included with each rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePack and system-planning note\u003c\/h3\u003e\n\u003cp\u003eThe quantity is 12 complete rotors. Do not size the zone from the pack quantity alone. Select the nozzle for each position, total the resulting flow and verify the available operating pressure after pipework and fitting losses. Use suitable 1-inch BSP connections and support each rotor on an appropriate swing joint.\u003c\/p\u003e\n\u003ch3\u003eIrri Hub guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eBSP, BSPT and NPT irrigation thread identification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eSwing-joint selection and sprinkler riser support\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/sprinkler-check-valves-low-head-drainage\"\u003eSprinkler check valves and low-head drainage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732155912530,"sku":"i-25-04-SS-B","price":649.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI25BoxAmountx124.jpg?v=1789494926"},{"product_id":"hunter-i25","title":"Hunter I25","description":"\u003ch2\u003eHunter I-25 10 cm Stainless-Steel Commercial Turf Rotor\u003c\/h2\u003e\n\u003cp\u003eThis Hunter I-25 is a commercial rotor for large irrigated turf, including parks, commercial landscapes and general sports-turf areas. Its stainless-steel riser is intended for demanding installations, while the adjustable arc allows part- or full-circle operation from the same model.\u003c\/p\u003e\n\u003ch3\u003eExact configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel family: Hunter I-25-04-SS\u003c\/li\u003e\n\u003cli\u003ePop-up height: 10 cm (4-inch)\u003c\/li\u003e\n\u003cli\u003eStainless-steel riser\u003c\/li\u003e\n\u003cli\u003eAdjustable arc: 50° to 360°\u003c\/li\u003e\n\u003cli\u003eRadius: 11.9 to 21.6 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003eFlow: 0.82 to 7.24 m³\/h (13.6 to 120.7 L\/min)\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2.5 to 7.0 bar\u003c\/li\u003e\n\u003cli\u003eInlet: 1-inch BSP female thread\u003c\/li\u003e\n\u003cli\u003eBuilt-in drain check valve, rated by Hunter for up to 3 m of elevation\u003c\/li\u003e\n\u003cli\u003eFive standard nozzles included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing and installing the rotor\u003c\/h3\u003e\n\u003cp\u003eUse Hunter's I-25 performance chart to select the nozzle from the available flow, operating pressure and required radius. Confirm the complete zone demand and pressure losses before ordering. A correctly sized swing joint supports the rotor and allows the top to be set to finished grade.\u003c\/p\u003e\n\u003ch3\u003eIrri Hub guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eBSP, BSPT and NPT irrigation thread identification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eSwing-joint selection and sprinkler riser support\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/sprinkler-check-valves-low-head-drainage\"\u003eSprinkler check valves and low-head drainage\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732156469586,"sku":"HUNSPR-I2504PC-SS-CV","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI252.jpg?v=1789494927"},{"product_id":"hunter-i20-box-x20-copy","title":"Hunter I20 Box x20","description":"\u003ch2\u003eBox of 20 Hunter I-20 stainless-steel rotors\u003c\/h2\u003e\u003cp\u003eThis trade pack contains 20 I-20 rotors with 10 cm stainless-steel pop-up risers. It suits larger installations where the same durable adjustable rotor is being scheduled across a complete landscape zone or project.\u003c\/p\u003e\u003ch3\u003eSpecification per rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up height:\u003c\/strong\u003e 10 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e ¾-inch BSP female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable 50° to 360°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 4.9 to 14.0 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 1.2 to 53.8 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e 1.4 to 7.0 bar; Hunter recommends 1.7 to 4.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e stainless-steel riser, check valve and FloStop control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the required nozzle duty and spacing for each position before installation. Use the \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003espacing and precipitation guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003einlet guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732157157714,"sku":"HSI2004-SSBOX","price":509.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI20_f4bb79ef-fa07-4e45-89ed-7d1f28b336ec.jpg?v=1789494928"},{"product_id":"hunter-i20-x10-super-sale","title":"Hunter I20 x10 Super Sale","description":"\u003ch2\u003ePack of 10 Hunter I-20 stainless-steel rotors\u003c\/h2\u003e\u003cp\u003eThis pack contains 10 I-20 rotors with 10 cm stainless-steel pop-up risers. It is intended for multi-head landscape installations where consistent rotor selection, nozzle planning and spacing are required across the zone.\u003c\/p\u003e\u003ch3\u003eSpecification per rotor\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up height:\u003c\/strong\u003e 10 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e ¾-inch BSP female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable 50° to 360°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 4.9 to 14.0 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 1.2 to 53.8 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e 1.4 to 7.0 bar; Hunter recommends 1.7 to 4.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e stainless-steel riser, check valve and FloStop control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign the zone from the nozzle performance data rather than radius alone. See the \u003ca href=\"\/pages\/head-to-head-sprinkler-spacing\"\u003ehead-to-head spacing guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-spacing-and-precipitation-rate\"\u003eprecipitation guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732157190482,"sku":"60145","price":259.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI20x10SuperSale.jpg?v=1789494930"},{"product_id":"hunter-i20","title":"Hunter I20","description":"\u003ch2\u003eHunter I-20 stainless-steel landscape rotor\u003c\/h2\u003e\u003cp\u003eThis I-20 combines a 10 cm pop-up stainless-steel riser with the adjustment and shut-off features used across Hunter's I-20 range. It is a robust choice for larger landscape irrigation zones where the nozzle, spacing and available pressure are selected together.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-up height:\u003c\/strong\u003e 10 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e ¾-inch BSP female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc:\u003c\/strong\u003e adjustable 50° to 360°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadius:\u003c\/strong\u003e 4.9 to 14.0 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow:\u003c\/strong\u003e 1.2 to 53.8 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e 1.4 to 7.0 bar; Hunter recommends 1.7 to 4.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e check valve, FloStop control and non-strippable drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSize the nozzle from the hydraulic duty and use head-to-head spacing. See our \u003ca href=\"\/pages\/choosing-irrigation-sprinklers-and-nozzles\"\u003esprinkler and nozzle selection guide\u003c\/a\u003e, \u003ca href=\"\/pages\/sprinkler-inlet-sizes-and-connections\"\u003esprinkler inlet guide\u003c\/a\u003e and \u003ca href=\"\/pages\/swing-joint-selection-sprinkler-riser-support\"\u003eswing-joint guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePop-up irrigation rotor. Select the exact model and nozzle duty for the system pressure, required radius and watering pattern.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54732157354322,"sku":"HUNSPR-I2004PC-SS-CV","price":26.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/HunterI20.jpg?v=1789494930"},{"product_id":"rain-bird-900-950-artificial-grass-cover-ring","title":"Rain Bird 900\/950 Artificial Grass Cover \u0026 Ring","description":"\u003cp\u003e\u003cstrong\u003ePer order - normally dispatched in 3-5 working days.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRain Bird Eagle 900\/950 Artificial Grass Cover \u0026amp; Case Ring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA purpose-made artificial-grass cover and case-ring accessory for compatible Rain Bird Eagle 900 and 950 series rotors. It helps the finished surface blend into synthetic-turf installations, particularly around perimeter sprinklers on sports pitches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an accessory only - it is not a complete sprinkler or rotor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatible with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRain Bird Eagle 900 series rotors\u003c\/li\u003e\n\u003cli\u003eRain Bird Eagle 950 series rotors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArtificial-grass football and sports pitches\u003c\/li\u003e\n\u003cli\u003eTraining facilities and commercial synthetic-turf areas\u003c\/li\u003e\n\u003cli\u003eInstallations where the rotor needs a discreet, finished appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease check compatibility with the installed rotor and case before ordering.\u003c\/p\u003e\n\u003cp\u003eArtificial-grass cover and case-ring accessory for the stated rotor families; rotor is separate.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Default Title","offer_id":54732187369810,"sku":"B99500","price":219.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RainBird900950ArtificialGrassCover_Ring.jpg?v=1789495043"},{"product_id":"rain-bird-8005-rotors","title":"Rain Bird 8005 Rotors","description":"\u003cp\u003e\u003cstrong\u003eA heavy-duty rotor commonly used inside football pitches and other large sports-turf areas.\u003c\/strong\u003e The Rain Bird 8005 combines adjustable part-circle and non-reversing full-circle operation. A compatible sod cup can reduce the visible hard surface in natural-turf installations.\u003c\/p\u003e\u003ch2\u003eVerified operating range\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRadius: 11.9 to 24.7 m\u003c\/li\u003e\n\u003cli\u003eFlow: 0.86 to 8.24 m³\/h\u003c\/li\u003e\n\u003cli\u003ePressure: 3.5 to 6.9 bar\u003c\/li\u003e\n\u003cli\u003e50° to 330° part-circle or 360° full-circle operation\u003c\/li\u003e\n\u003cli\u003e1-inch BSP female inlet\u003c\/li\u003e\n\u003cli\u003eSeal-A-Matic check valve with up to 3.1 m elevation holdback\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThis listed option\u003c\/h2\u003e\u003cp\u003eThe active variant is 8005NP, the non-potable-cover configuration. Confirm the purple identification, riser requirement, nozzle and hydraulic duty for the pitch design. The sod cup shown separately is an accessory and is not stated as included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnection help:\u003c\/strong\u003e The listed UK model uses a BSP female inlet. See the \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eIrri Hub thread identification guide\u003c\/a\u003e if the existing connection is uncertain.\u003c\/p\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"8005NP","offer_id":54732188418386,"sku":"B81200NP","price":166.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RainBird8005Rotors.jpg?v=1789495044"},{"product_id":"rain-bird-6504-plastic-riser-rotors-falcon-copy-1","title":"Rain Bird 6504 Plastic Riser Rotors Falcon","description":"\u003cp\u003e\u003cstrong\u003eA practical large-turf rotor for football pitches, training grounds, schools, parks and commercial landscapes.\u003c\/strong\u003e This Rain Bird Falcon 6504 version uses a 4-inch plastic riser and is available in separate full-circle and part-circle variants.\u003c\/p\u003e\u003ch2\u003eVerified family specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRadius: 11.9 to 19.8 m\u003c\/li\u003e\n\u003cli\u003eFlow: 0.66 to 4.93 m³\/h\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2.1 to 6.2 bar\u003c\/li\u003e\n\u003cli\u003e1-inch BSP female inlet\u003c\/li\u003e\n\u003cli\u003eSeal-A-Matic check valve with up to 3.1 m elevation holdback\u003c\/li\u003e\n\u003cli\u003eNozzle set included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose the correct version\u003c\/h2\u003e\u003cp\u003eSelect Full Cycle for fixed 360° coverage or Part Cycle for an adjustable 40° to 360° arc. Confirm the chosen variant, nozzle duty, pressure and flow against the sports-turf layout before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnection help:\u003c\/strong\u003e The listed UK model uses a BSP female inlet. See the \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eIrri Hub thread identification guide\u003c\/a\u003e if the existing connection is uncertain.\u003c\/p\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Full Cycle - Plastic Riser","offer_id":54732188811602,"sku":"B65311","price":67.93,"currency_code":"GBP","in_stock":true},{"title":"Part Cycle - Plastic Riser","offer_id":54732188844370,"sku":"B65301","price":54.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RainBird6504PlasticRiserRotorsFalcon.png?v=1789495050"},{"product_id":"rain-bird-6504-stainless-steel-riser-rotors-falcon","title":"Rain Bird 6504 Stainless Steel Riser Rotors Falcon","description":"\u003cp\u003e\u003cstrong\u003eBuilt for demanding sports-turf and large public-landscape installations.\u003c\/strong\u003e This Falcon 6504 has a stainless-steel-covered 4-inch riser for added protection in exposed or heavily used areas such as football pitches, training grounds, parks and schools.\u003c\/p\u003e\u003ch2\u003eVerified family specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRadius: 11.9 to 19.8 m\u003c\/li\u003e\n\u003cli\u003eFlow: 0.66 to 4.93 m³\/h\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2.1 to 6.2 bar\u003c\/li\u003e\n\u003cli\u003e1-inch BSP female inlet\u003c\/li\u003e\n\u003cli\u003eSeal-A-Matic check valve with up to 3.1 m elevation holdback\u003c\/li\u003e\n\u003cli\u003eNozzle set included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose the correct version\u003c\/h2\u003e\u003cp\u003eThe Full Cycle variant provides fixed 360° coverage. The Part Cycle variant adjusts from 40° to 360°. Check the selected variant and hydraulic duty against the irrigation design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnection help:\u003c\/strong\u003e The listed UK model uses a BSP female inlet. See the \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eIrri Hub thread identification guide\u003c\/a\u003e if the existing connection is uncertain.\u003c\/p\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Full Cycle - Stainless Steel Riser","offer_id":54732188877138,"sku":"B65811","price":54.22,"currency_code":"GBP","in_stock":true},{"title":"Part Cycle - Stainless Steel Riser","offer_id":54732188909906,"sku":"B65801","price":67.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/rain-bird-6504-falcon-stainless-rotor-800.jpg?v=1789495051"},{"product_id":"rain-bird-6504-plastic-riser-rotors-falcon-copy","title":"Rain Bird 952E","description":"\u003cp\u003e\u003cstrong\u003eA long-throw valve-in-head rotor for golf and the perimeter of large sports-turf areas.\u003c\/strong\u003e The Rain Bird 952E suits golf-course coverage and, where the hydraulic design supports it, perimeter positions around football pitches and bowls greens.\u003c\/p\u003e\u003ch2\u003eListed GRE952860 configuration\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e#60 nozzle\u003c\/li\u003e\n\u003cli\u003eFactory pressure setting: 5.5 bar (80 psi)\u003c\/li\u003e\n\u003cli\u003eVerified #60 duty at 5.5 bar: approximately 26.8 m radius and 10.2 m³\/h\u003c\/li\u003e\n\u003cli\u003e360° full-circle or adjustable 30° to 345° part-circle operation\u003c\/li\u003e\n\u003cli\u003e1½-inch ACME female inlet\u003c\/li\u003e\n\u003cli\u003eConventional electric valve-in-head control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign check\u003c\/h2\u003e\u003cp\u003eUse the exact pressure and flow duty when assessing spacing around a pitch or green. Confirm the conventional control method, swing-joint outlet and safe head position before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnection help:\u003c\/strong\u003e This rotor uses an ACME sprinkler connection, not a standard BSP pipe thread. See the \u003ca href=\"\/pages\/acme-threads-irrigation\"\u003eIrri Hub ACME thread guide\u003c\/a\u003e before selecting a swing joint or adaptor.\u003c\/p\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Default Title","offer_id":54732188942674,"sku":"GRE952860","price":530.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/rain-bird-952e-golf-rotor-800.jpg?v=1789495052"},{"product_id":"rain-bird-5006-plus-rotor-with-stainless-riser","title":"Rain Bird 5006 Plus Rotor with Stainless Riser","description":"\u003ch2\u003eStainless 6-inch rotor for high-use turf areas\u003c\/h2\u003e\u003cp\u003eThe Rain Bird 5006 Plus stainless-riser model combines additional pop-up clearance with a stainless-steel riser for managed parks, commercial landscapes and suitable sports-turf installations. Its 6-inch pop-up helps the stream clear deeper turf or recesses, while factory pressure regulation and the Seal-A-Matic check valve support consistent operation within a correctly designed system.\u003c\/p\u003e\u003ch2\u003eKey specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSKU Y65950SS\u003c\/li\u003e\n\u003cli\u003eRadius: 7.6 to 15.2 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003eAdjustable arc: 40° to 360°\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 1.7 to 4.5 bar\u003c\/li\u003e\n\u003cli\u003eStainless-steel riser with 15.2 cm (6 inch) pop-up\u003c\/li\u003e\n\u003cli\u003eFactory pressure regulation at 3.1 bar\u003c\/li\u003e\n\u003cli\u003eSeal-A-Matic check valve\u003c\/li\u003e\n\u003cli\u003e¾-inch BSP female bottom inlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlanning the installation\u003c\/h2\u003e\u003cp\u003eCheck the design pressure, available flow and Rain Curtain nozzle data before selecting spacing. The broad sports-turf use is evidence-backed, but this listing does not claim a particular football, golf, cricket or bowls application.\u003c\/p\u003e\u003cdiv class=\"irri-hub-help\"\u003e\n\u003cstrong\u003eCheck the connection before ordering:\u003c\/strong\u003e use the \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eIrri Hub thread identification guide\u003c\/a\u003e to confirm the BSP size and sealing arrangement.\u003c\/div\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Default Title","offer_id":54732189106514,"sku":"Y65950SS","price":69.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RainBird5006PlusRotorwithStainlessRiser.jpg?v=1789495054"},{"product_id":"rain-bird-5006-plus-rotor-with-plastic-riser","title":"Rain Bird 5006 Plus Rotor with Plastic Riser","description":"\u003ch2\u003eExtra pop-up clearance for medium and large turf\u003c\/h2\u003e\u003cp\u003eThe Rain Bird 5006 Plus uses a 6-inch plastic riser where a standard 4-inch rotor would not provide enough clearance. It is a useful choice for larger lawns, parks, commercial landscapes and suitable sports-turf zones when its hydraulic performance matches the design. Adjustable part-circle and full-circle operation are provided in one body.\u003c\/p\u003e\u003ch2\u003eKey specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSKU Y45850\u003c\/li\u003e\n\u003cli\u003eRadius: 7.6 to 15.2 m, depending on nozzle and pressure\u003c\/li\u003e\n\u003cli\u003eAdjustable arc: 40° to 360°\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 1.7 to 4.5 bar\u003c\/li\u003e\n\u003cli\u003ePlastic riser with 15.2 cm (6 inch) pop-up\u003c\/li\u003e\n\u003cli\u003eSeal-A-Matic check valve and flow shut-off\u003c\/li\u003e\n\u003cli\u003e¾-inch BSP female bottom inlet; no side inlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlanning the installation\u003c\/h2\u003e\u003cp\u003eSelect the nozzle and spacing from the available pressure and flow. The taller pop-up improves clearance but does not change the need to install the body at the correct finished level and confirm the irrigation design before ordering.\u003c\/p\u003e\u003cdiv class=\"irri-hub-help\"\u003e\n\u003cstrong\u003eCheck the connection before ordering:\u003c\/strong\u003e use the \u003ca href=\"\/pages\/bsp-bspt-npt-irrigation-thread-identification\"\u003eIrri Hub thread identification guide\u003c\/a\u003e to confirm the BSP size and sealing arrangement.\u003c\/div\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Default Title","offer_id":54732190318930,"sku":"Y45850","price":53.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RainBird5006PlusRotorwithPlasticRiser.jpg?v=1789495056"},{"product_id":"rain-bird-11000","title":"Rain Bird 11000","description":"\u003cp\u003e\u003cstrong\u003eDesigned for irrigating inside football pitches and other large managed sports-turf areas.\u003c\/strong\u003e The Rain Bird 11000 is a long-throw pop-up rotor with a small exposed head, top-serviceable components and an optional sod cup for natural-turf installations.\u003c\/p\u003e\u003ch2\u003eSupplied #52 configuration\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e#52 nozzle\u003c\/li\u003e\n\u003cli\u003eVerified radius: 23.8 to 27.4 m from 4.1 to 6.9 bar\u003c\/li\u003e\n\u003cli\u003eVerified flow: 7.3 to 9.2 m³\/h across that pressure range\u003c\/li\u003e\n\u003cli\u003e1½-inch ACME female inlet\u003c\/li\u003e\n\u003cli\u003e360° full-circle or adjustable 30° to 345° part-circle operation\u003c\/li\u003e\n\u003cli\u003eSeal-A-Matic check valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere this rotor fits\u003c\/h2\u003e\u003cp\u003eUse it where the irrigation design calls for long spacing and in-field coverage on football or comparable large turf. The sod cup is sold separately. Confirm the #52 duty point, available flow and pressure, swing-joint connection and final level before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnection help:\u003c\/strong\u003e This rotor uses an ACME sprinkler connection, not a standard BSP pipe thread. See the \u003ca href=\"\/pages\/acme-threads-irrigation\"\u003eIrri Hub ACME thread guide\u003c\/a\u003e before selecting a swing joint or adaptor.\u003c\/p\u003e\n\u003cp\u003eRotor sprinkler for the stated lawn, golf or sports-turf application. Choose exact arc, riser and inlet option.\u003c\/p\u003e","brand":"Rain Bird","offers":[{"title":"Default Title","offer_id":54732190679378,"sku":"B11052","price":196.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/RainBird11000.webp?v=1789495060"},{"product_id":"perrot-za-22-impact-sprinkler-inch-bsp-male","title":"Perrot ZA 22 Impact Sprinkler – ½ inch BSP Male","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER \/ SPECIAL ORDER. This range is not held in stock. Dispatch timing is confirmed individually.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perrot ZA 22 is an impact sprinkler for agricultural and horticultural irrigation. Match the connection, watering pattern and nozzle to the area and available water supply.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnection: ½ inch BSP male.\u003c\/li\u003e\n\u003cli\u003eOperating pressure at the sprinkler: 2.5–4.5 bar.\u003c\/li\u003e\n\u003cli\u003eThrow radius: 10.5–14.0 m across the model family.\u003c\/li\u003e\n\u003cli\u003eFlow: 0.69–1.89 m³\/h across the model family.\u003c\/li\u003e\n\u003cli\u003eTrajectory: 22°.\u003c\/li\u003e\n\u003cli\u003eNozzle\/configuration: Selected full-circle or part-circle version; check the supplied nozzle size.\u003c\/li\u003e\n\u003cli\u003eMaterials: Brass, stainless steel and engineering plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFamily ranges cover different nozzles and pressures; they are not the performance of every option. Radius is the distance from the sprinkler, rather than the full watering diameter. Wind, spacing and available pressure affect the installed result.\u003c\/p\u003e\u003ch2\u003eChoosing the version\u003c\/h2\u003e\u003cp\u003eChoose full circle for continuous 360° watering or part circle for an adjustable sector. The ZA 22 W mechanism also permits full-circle operation.\u003c\/p\u003e\u003ch2\u003eManufacturer documents\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/ZA22_Sellsheet_EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the ZA 22 data sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Operating_manual-Impact_sprinkler-E.pdf\" target=\"_blank\" rel=\"noopener\"\u003eImpact sprinkler operating manual\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck pressure and flow while water is running, not just static pressure. The sprinkler head is supplied as the selected option; pipework and mounting equipment are separate unless expressly listed. Manufacturer photographs show the model body and may use a different nozzle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/perrot\"\u003eView the Perrot range\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us to check your requirements\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eImpact irrigation sprinkler. Select the stated full-circle or part-circle configuration and check the inlet and nozzle option.\u003c\/p\u003e","brand":"Perrot","offers":[{"title":"Full circle","offer_id":55504328851794,"sku":"59PZA22FC","price":31.33,"currency_code":"GBP","in_stock":true},{"title":"Part circle","offer_id":55504328884562,"sku":"59PZA22W","price":41.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/perrot-za-full-official.jpg?v=1795179119"},{"product_id":"perrot-zb-22-impact-sprinkler-inch-bsp-male","title":"Perrot ZB 22 Impact Sprinkler – ¾ inch BSP Male","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER \/ SPECIAL ORDER. This range is not held in stock. Dispatch timing is confirmed individually.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perrot ZB 22 is an impact sprinkler for agricultural and horticultural irrigation. Match the connection, watering pattern and nozzle to the area and available water supply.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnection: ¾ inch BSP male.\u003c\/li\u003e\n\u003cli\u003eOperating pressure at the sprinkler: 2.5–4.5 bar.\u003c\/li\u003e\n\u003cli\u003eThrow radius: 14.5–17.8 m across the model family.\u003c\/li\u003e\n\u003cli\u003eFlow: 0.99–3.82 m³\/h across the model family.\u003c\/li\u003e\n\u003cli\u003eTrajectory: 22°.\u003c\/li\u003e\n\u003cli\u003eNozzle\/configuration: Full-circle twin-nozzle or part-circle version; check the selected configuration.\u003c\/li\u003e\n\u003cli\u003eMaterials: Brass, stainless steel and engineering plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFamily ranges cover different nozzles and pressures; they are not the performance of every option. Radius is the distance from the sprinkler, rather than the full watering diameter. Wind, spacing and available pressure affect the installed result.\u003c\/p\u003e\u003ch2\u003eChoosing the version\u003c\/h2\u003e\u003cp\u003eThe full-circle twin-nozzle version and part-circle version are separate options. Select the watering pattern before ordering.\u003c\/p\u003e\u003ch2\u003eManufacturer documents\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Datenblatt_ZB22.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the ZB 22 data sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Operating_manual-Impact_sprinkler-E.pdf\" target=\"_blank\" rel=\"noopener\"\u003eImpact sprinkler operating manual\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck pressure and flow while water is running, not just static pressure. The sprinkler head is supplied as the selected option; pipework and mounting equipment are separate unless expressly listed. Manufacturer photographs show the model body and may use a different nozzle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/perrot\"\u003eView the Perrot range\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us to check your requirements\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eImpact irrigation sprinkler. Select the stated full-circle or part-circle configuration and check the inlet and nozzle option.\u003c\/p\u003e","brand":"Perrot","offers":[{"title":"Full circle – twin nozzle","offer_id":55504329179474,"sku":"59PZB22FCT","price":52.76,"currency_code":"GBP","in_stock":true},{"title":"Part circle","offer_id":55504329212242,"sku":"59PZB22W","price":58.93,"currency_code":"GBP","in_stock":true}]},{"product_id":"perrot-ze-30-part-circle-impact-sprinkler-1-inch-5-mm-nozzle","title":"Perrot ZE 30 Part-Circle Impact Sprinkler – 1 inch, 5 mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER \/ SPECIAL ORDER. This range is not held in stock. Dispatch timing is confirmed individually.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perrot ZE 30 W is an impact sprinkler for agricultural and horticultural irrigation. Match the connection, watering pattern and nozzle to the area and available water supply.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnection: 1 inch BSP male.\u003c\/li\u003e\n\u003cli\u003eOperating pressure at the sprinkler: 3–7 bar.\u003c\/li\u003e\n\u003cli\u003eThrow radius: 14.8–17.9 m with the listed 5 mm nozzle.\u003c\/li\u003e\n\u003cli\u003eFlow: 1.54–2.35 m³\/h with the listed 5 mm nozzle.\u003c\/li\u003e\n\u003cli\u003eTrajectory: 30°.\u003c\/li\u003e\n\u003cli\u003eNozzle\/configuration: 5 mm.\u003c\/li\u003e\n\u003cli\u003eMaterials: Brass, stainless steel, engineering plastic, cast aluminium and galvanised steel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFamily ranges cover different nozzles and pressures; they are not the performance of every option. Radius is the distance from the sprinkler, rather than the full watering diameter. Wind, spacing and available pressure affect the installed result.\u003c\/p\u003e\u003ch2\u003eChoosing the version\u003c\/h2\u003e\u003cp\u003eThe listed item is the part-circle version. Check the sprinkler sector and nozzle requirements before ordering.\u003c\/p\u003e\u003ch2\u003eManufacturer documents\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/ZE_30_Sellsheet_EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the ZE 30 W data sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Operating_manual-Impact_sprinkler-E.pdf\" target=\"_blank\" rel=\"noopener\"\u003eImpact sprinkler operating manual\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck pressure and flow while water is running, not just static pressure. The sprinkler head is supplied as the selected option; pipework and mounting equipment are separate unless expressly listed. Manufacturer photographs show the model body and may use a different nozzle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/perrot\"\u003eView the Perrot range\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us to check your requirements\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eImpact irrigation sprinkler. Select the stated full-circle or part-circle configuration and check the inlet and nozzle option.\u003c\/p\u003e","brand":"Perrot","offers":[{"title":"1 inch BSP male – 5 mm nozzle","offer_id":55504329245010,"sku":"59PZE30W","price":98.53,"currency_code":"GBP","in_stock":true}]},{"product_id":"perrot-zk-30-part-circle-impact-sprinkler-1-inch-8-mm-nozzle","title":"Perrot ZK 30 Part-Circle Impact Sprinkler – 1 inch, 8 mm Nozzle","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER \/ SPECIAL ORDER. This range is not held in stock. Dispatch timing is confirmed individually.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perrot ZK 30 W is an impact sprinkler for agricultural and horticultural irrigation. Match the connection, watering pattern and nozzle to the area and available water supply.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnection: 1 inch BSP male.\u003c\/li\u003e\n\u003cli\u003eOperating pressure at the sprinkler: 3–7 bar.\u003c\/li\u003e\n\u003cli\u003eThrow radius: 19.8–23.7 m with the listed 8 mm nozzle.\u003c\/li\u003e\n\u003cli\u003eFlow: 3.94–6.02 m³\/h with the listed 8 mm nozzle.\u003c\/li\u003e\n\u003cli\u003eTrajectory: 30°.\u003c\/li\u003e\n\u003cli\u003eNozzle\/configuration: 8 mm.\u003c\/li\u003e\n\u003cli\u003eMaterials: Brass, stainless steel and engineering plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFamily ranges cover different nozzles and pressures; they are not the performance of every option. Radius is the distance from the sprinkler, rather than the full watering diameter. Wind, spacing and available pressure affect the installed result.\u003c\/p\u003e\u003ch2\u003eChoosing the version\u003c\/h2\u003e\u003cp\u003eThe listed item is the part-circle version. Check the sprinkler sector and nozzle requirements before ordering.\u003c\/p\u003e\u003ch2\u003eManufacturer documents\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Datenblatt_ZK30.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the ZK 30 W data sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Operating_manual-Impact_sprinkler-E.pdf\" target=\"_blank\" rel=\"noopener\"\u003eImpact sprinkler operating manual\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck pressure and flow while water is running, not just static pressure. The sprinkler head is supplied as the selected option; pipework and mounting equipment are separate unless expressly listed. Manufacturer photographs show the model body and may use a different nozzle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/perrot\"\u003eView the Perrot range\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us to check your requirements\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eImpact irrigation sprinkler. Select the stated full-circle or part-circle configuration and check the inlet and nozzle option.\u003c\/p\u003e","brand":"Perrot","offers":[{"title":"1 inch BSP male – 8 mm nozzle","offer_id":55504329277778,"sku":"59PZK30W","price":149.83,"currency_code":"GBP","in_stock":true}]},{"product_id":"perrot-zm-22-part-circle-impact-sprinkler-1-inch-bsp-male","title":"Perrot ZM 22 Part-Circle Impact Sprinkler – 1½ inch BSP Male","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER \/ SPECIAL ORDER. This range is not held in stock. Dispatch timing is confirmed individually.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perrot ZM 22 W is an impact sprinkler for agricultural and horticultural irrigation. Match the connection, watering pattern and nozzle to the area and available water supply.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnection: 1½ inch BSP male.\u003c\/li\u003e\n\u003cli\u003eOperating pressure at the sprinkler: 3–7 bar.\u003c\/li\u003e\n\u003cli\u003eThrow radius: 23.2–34.5 m across the model family.\u003c\/li\u003e\n\u003cli\u003eFlow: 6.16–24.10 m³\/h across the model family.\u003c\/li\u003e\n\u003cli\u003eTrajectory: 22°.\u003c\/li\u003e\n\u003cli\u003eNozzle\/configuration: Check the supplied nozzle size; the model family covers 10–16 mm.\u003c\/li\u003e\n\u003cli\u003eMaterials: Brass, stainless steel and engineering plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFamily ranges cover different nozzles and pressures; they are not the performance of every option. Radius is the distance from the sprinkler, rather than the full watering diameter. Wind, spacing and available pressure affect the installed result.\u003c\/p\u003e\u003ch2\u003eChoosing the version\u003c\/h2\u003e\u003cp\u003eThe listed item is the part-circle version. Check the sprinkler sector and nozzle requirements before ordering.\u003c\/p\u003e\u003ch2\u003eManufacturer documents\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Datenblatt_ZM22.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the ZM 22 W data sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Operating_manual-Impact_sprinkler-E.pdf\" target=\"_blank\" rel=\"noopener\"\u003eImpact sprinkler operating manual\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck pressure and flow while water is running, not just static pressure. The sprinkler head is supplied as the selected option; pipework and mounting equipment are separate unless expressly listed. Manufacturer photographs show the model body and may use a different nozzle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/perrot\"\u003eView the Perrot range\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us to check your requirements\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eImpact irrigation sprinkler. Select the stated full-circle or part-circle configuration and check the inlet and nozzle option.\u003c\/p\u003e","brand":"Perrot","offers":[{"title":"1½ inch BSP male – part circle","offer_id":55504329310546,"sku":"59PZM22W","price":210.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/perrot-zm-official.jpg?v=1795179120"},{"product_id":"perrot-zx-30-part-circle-impact-sprinkler-inch-bsp-male","title":"Perrot ZX 30 Part-Circle Impact Sprinkler – ½ inch BSP Male","description":"\u003cp\u003e\u003cstrong\u003ePRE-ORDER \/ SPECIAL ORDER. This range is not held in stock. Dispatch timing is confirmed individually.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Perrot ZX 30 WR is an impact sprinkler for agricultural and horticultural irrigation. Match the connection, watering pattern and nozzle to the area and available water supply.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnection: ½ inch BSP male.\u003c\/li\u003e\n\u003cli\u003eOperating pressure at the sprinkler: 2–4.5 bar.\u003c\/li\u003e\n\u003cli\u003eThrow radius: 7.7–11.1 m across the model family.\u003c\/li\u003e\n\u003cli\u003eFlow: 0.39–0.92 m³\/h across the model family.\u003c\/li\u003e\n\u003cli\u003eTrajectory: 30°.\u003c\/li\u003e\n\u003cli\u003eNozzle\/configuration: Check the supplied nozzle size; the model family covers 2.8–3.5 mm.\u003c\/li\u003e\n\u003cli\u003eMaterials: Brass, stainless steel and engineering plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFamily ranges cover different nozzles and pressures; they are not the performance of every option. Radius is the distance from the sprinkler, rather than the full watering diameter. Wind, spacing and available pressure affect the installed result.\u003c\/p\u003e\u003ch2\u003eChoosing the version\u003c\/h2\u003e\u003cp\u003eThe ZX 30 WR uses a flip-up control lever for full-circle or part-circle operation.\u003c\/p\u003e\u003ch2\u003eManufacturer documents\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Datenblatt_ZX30.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the ZX 30 WR data sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.perrot.de\/fileadmin\/user_upload\/PDF_s\/Operating_manual-Impact_sprinkler-E.pdf\" target=\"_blank\" rel=\"noopener\"\u003eImpact sprinkler operating manual\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck pressure and flow while water is running, not just static pressure. The sprinkler head is supplied as the selected option; pipework and mounting equipment are separate unless expressly listed. Manufacturer photographs show the model body and may use a different nozzle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/perrot\"\u003eView the Perrot range\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003eask us to check your requirements\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eImpact irrigation sprinkler. Select the stated full-circle or part-circle configuration and check the inlet and nozzle option.\u003c\/p\u003e","brand":"Perrot","offers":[{"title":"½ inch BSP male – part circle","offer_id":55504329769298,"sku":"59PZX30WR","price":34.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/7010\/2354\/files\/perrot-zx-official.jpg?v=1795179122"}],"url":"https:\/\/irrigationstockist.co.uk\/collections\/sports-sprinklers.oembed?page=2","provider":"Irrigation Stockist","version":"1.0","type":"link"}