Controlled Linear Interpolation

Technical learning page. Best for engineers, designers and trade specialists who need the method, assumptions and evidence. It is not a substitute for site-specific design or current manufacturer data.

Linear interpolation estimates a value between two authorised table rows. It is a supporting numerical method, not evidence that a particular technical table is suitable for irrigation design.

In plain English

Interpolation fills a point between two approved table values. It can be useful when a requested condition lies inside a published range. It must not be used beyond the table or across a physical change that makes a straight-line estimate inappropriate.

Method

For two points (x0, y0) and (x1, y1), the two-node linear approximation is y = y0 + (y1 - y0) × (x - x0) ÷ (x1 - x0).

Controls

  • Both rows must come from one authorised source table and use compatible units.
  • The requested input must be bracketed by the two rows.
  • An exact table node returns the recorded node value.
  • Extrapolation beyond the authorised range is withheld.
  • Interpolation must not cross a phase, regime or other discontinuity boundary.
  • The output remains linked to both source rows and is labelled calculated or interpolated.

Limitations

The calculation checks establish the arithmetic and rejection behaviour only. They do not estimate physical interpolation error or approve a water-property, product-performance or manufacturer dataset. The IAPWS program-verification points are expressly excluded from use as an interpolation table.

Evidence

The mathematical form is supported by equation 3.3.14 in the NIST Digital Library of Mathematical Functions.

Related Irri Hub guides