Find practical guides for choosing equipment, planning an irrigation system, installation and fault finding. Start with the job you need to do and use the measurements from your own site alongside the current manufacturer instructions.
How to use these guides
- Identify the result you need and the part of the system involved.
- Measure the available running flow and pressure where they affect the choice.
- Check pipe size, length, elevation, connection type and existing equipment.
- Choose a guide below, then match the proposed component to the sizes, connections and operating requirements in its product information.
- Ask for technical help if measurements are missing or the work needs specialist design.
Irri Hub library: Return to the main Irri Hub directory.
Choose your route
- Choose compatible equipment when you know the job but not the component.
- Use the calculators and worked methods when flow, pressure, pipe size or pump duty must be checked.
- Plan an irrigation zone before combining outlets.
- Follow fault finding when an existing system is not performing correctly.
- Request technical support with the measurements, photographs and product details needed for a useful answer.
UK units and product information
Irri Hub uses metric units first: millimetres for pipe dimensions, metres for length and head, litres per minute or cubic metres per hour for flow, and bar or kilopascals for pressure. Imperial designations are included where UK legacy pipework or manufacturer data makes them necessary. Never assume that an imperial nominal pipe size equals its measured outside diameter.
Design and field engineering
- Irrigation site survey checklist
- Design brief and performance criteria
- Calculate irrigation zone flow
- Critical-path hydraulic check
- Irrigation design review checklist
- Commissioning measurement record
- As-fitted drawings and handover