Start with the area you want to water, the available water supply and the result you need. Work through the steps below to choose compatible irrigation equipment using your site measurements and the current manufacturer instructions.
1. Define the application
Record whether the system serves a garden, landscape, golf course, sports pitch, commercial site or another application. Note planting, turf type, exposure, slopes and the area to be watered.
2. Measure the supply
Record dynamic flow and pressure at the proposed connection. Static pressure alone does not show what is available while the system operates. Pump-fed systems also need source level, lift, pipe route and electrical-control information.
3. Choose the watering method
- Rotors: larger turf areas and longer throw, subject to model performance.
- Sprays and rotary nozzles: smaller or shaped landscape areas.
- Dripline: borders, planting areas and suitable subsurface applications.
- Micro irrigation: pots, planters and individual plants.
- Hose and manual watering: flexible local use where automation is unnecessary.
4. Build compatible zones
Keep outlets with similar operating pressure and application rates together. Calculate total zone flow, pipe loss and elevation effects. Allow for valves, filtration, regulation, isolation and flushing.
5. Match the connections and controls
Check outside diameters, threads, voltage, controller compatibility, pressure ratings and material standards. Do not rely on a product photograph or nominal size alone.
Selection guides
If the choice remains unclear, send the information listed on our technical-help checklist.
6. Protect and control the supply
Include the components that make the system safe and serviceable, not only the outlets. Depending on the site, this can include an isolating valve, appropriate backflow protection, filtration, pressure regulation, a zone valve, a controller, suitable cable and watertight field connections.
For a UK mains-water connection, check the backflow risk and any notification requirement with the local water undertaker before treating a hose tap, check valve or irrigation valve as sufficient protection.
Before adding products to the basket
- Write down the required flow and operating pressure for each zone.
- Match the pipe outside diameter, thread form and size family to the fittings.
- Check valve and controller voltage, not just the connector shape.
- Match the filter rating and pressure-regulator operating range to the downstream equipment.
- Check whether fittings, adaptors, cable joints, valve boxes, flushing points and end closures are included.
- Keep one record of the selected product codes and the reason each was chosen.