Bedding is structural support for the pipe. “Put some stone around it” is not a complete specification.
What controls the detail
Pipe material, diameter, ring stiffness or strength, trench width, depth, ground, groundwater, traffic and adjacent excavation all matter. Approved Document H states that bedding and backfilling depend on depth, pipe size and strength, and refers to specific bedding classes and structural design.
Granular support
Where the design calls for granular bedding, use the specified clean material and grading. Form an even bed, provide socket holes where needed, support the barrel and place sidefill evenly. Compact by the approved method without displacing or damaging the pipe.
Do not improvise protection
Concrete surround, slabs or stronger pipe can alter load transfer and flexibility. They are not automatic remedies for shallow cover. Obtain the approved detail, preserve flexible joints where required and check manufacturer instructions.
Related guides
Important boundary
This is general UK-oriented guidance, not a drainage design or confirmation of compliance. Requirements differ across England, Wales, Scotland and Northern Ireland and may also depend on planning conditions, the approving body, sewerage undertaker, highway authority, environmental regulator, site risk and current standards. Use the approved design, current manufacturer instructions and competent advice. Never enter a drain, sewer or confined space.