Sprinkler performance must be checked at the outlet while the complete zone is flowing.
Static is not operating pressure
Static pressure can look adequate but fall when the valve and sprinklers operate. Allow for source behaviour, elevation and losses through pipework, valves, filters and fittings.
Too little and too much
Low pressure shortens radius and weakens distribution. Excess pressure can increase misting and drift. Select regulation from the outlet’s intended operating range and confirm the regulator’s own flow range.
Measure useful points
Record pressure near the zone inlet and at the least-favoured sprinkler. Check the nozzle, arc and radius at the same time. A regulator cannot increase an inadequate supply.
Related Irri Hub guides
Design boundary
This is general UK-oriented irrigation guidance, not a site design or a substitute for the selected manufacturer’s current data. Confirm measured dynamic pressure, available flow, levels, water quality, soil, planting and local requirements. Do not mix figures from different product families. Electrical work and contaminated or non-potable water require the appropriate competent assessment.
Browse by brand Rain Bird · Hunter · Netafim