A catch-can test measures the water that actually reaches the surface rather than relying only on catalogue performance.
Prepare the test
Use identical straight-sided containers in a repeatable grid. Record nozzle details, pressure, run time, wind, faults and container positions. Avoid comparing tests taken under very different conditions.
Measure and calculate
Measure captured depth in millimetres. Calculate the overall average and a stated uniformity measure, such as lower-quarter distribution uniformity, using the same method every time. Keep the raw readings.
Act on evidence
Investigate pressure, blocked or worn nozzles, incorrect arcs, spacing and obstructions. Do not hide poor distribution by applying more water everywhere.
Related Irri Hub guides
Design boundary
This is general UK-oriented irrigation guidance, not a site design or a substitute for the selected manufacturer’s current data. Confirm measured dynamic pressure, available flow, levels, water quality, soil, planting and local requirements. Do not mix figures from different product families. Electrical work and contaminated or non-potable water require the appropriate competent assessment.
Browse by brand Rain Bird · Hunter · Netafim