Colour alone does not prove material, size, pressure rating or permitted use. Treat an unmarked buried plastic pipe as unidentified until several independent clues agree.
Evidence to collect
- Photograph every continuous marking before cleaning removes it: manufacturer, material code, standard, outside diameter, wall thickness, SDR or pressure class, batch and date.
- Measure outside diameter with callipers at several positions and orientations. Record ovality.
- Measure accessible wall thickness only on a safely isolated cut sample.
- Record colour inside and outside, number of layers, barrier layer, reinforcement and the appearance of a clean cut.
- Trace what the pipe serves, its approximate age, joint type and whether it has carried potable water, irrigation water, chemicals, drainage or cable.
Do not identify by one feature
| Clue | Why it is insufficient alone |
|---|---|
| Blue or black colour | Several PE and other products use similar colours; stripes and fading vary. |
| Measured diameter | Different material systems can share an outside diameter but require different inserts, seals or preparation. |
| Existing fitting | It may be an old repair, an adaptor or an unsafe forced fit. |
| Flexibility | Age, temperature, wall thickness and material grade all affect feel. |
Decision boundary
If markings and measurements do not identify a recognised system, send the evidence to the pipe or fitting manufacturer. A universal or mechanical repair coupling is acceptable only when its current instructions explicitly cover the measured material, diameter, pressure, restraint and service. Otherwise replace back to a positively identified point.
Safety boundary: Do not flame-test, burn or heat unknown plastic. Do not assume a barrier layer is present because the outer pipe is blue. Do not use irrigation pressure to discover whether an unknown pipe is actually ducting, land drain, soil pipe or an abandoned service.
Pressure test and records
After a designed transition, use a controlled test procedure suitable for the identified pipe and system. Barricade stored-energy hazards, allow for PE creep where relevant, and record pressure, duration, temperature, make-up water and visible movement.
Limitation: photographs and dimensions can narrow possibilities but may not prove grade, ageing, contamination or remaining strength. Excavation, sampling or replacement may be necessary.
Related: PE, MDPE and HDPE terminology, PVC pressure versus drainage pipe and pressure-rated transitions.