Pressure, Velocity and Elevation: Bernoulli

Technical learning page. Best for engineers, designers and trade specialists who need the method, assumptions and evidence. It is not a substitute for site-specific design or current manufacturer data.

Bernoulli's equation helps explain how pressure, velocity and elevation are connected under ideal conditions. A real irrigation installation also needs pumps, losses and equipment to be accounted for separately.

In plain English

Pressure energy can change when water speeds up or changes elevation. Bernoulli provides the ideal relationship. Real irrigation work must then add pump input and subtract pipe and equipment losses.

Ideal form

p ÷ (ρg) + v² ÷ (2g) + z = constant.

p is pressure in pascals, ρ is density in kg/m³, g is gravitational acceleration in m/s², v is velocity in m/s and z is elevation relative to one consistent datum.

Engineering extension

The extended energy balance adds head supplied by a pump and separately records head removed by a turbine or dissipated through pipes and equipment. Those terms must not be hidden inside an ideal example.

Assumptions and limits

The ideal form assumes steady, incompressible and inviscid flow along a streamline with no shaft work. It cannot calculate real pipe friction or cross a pump without an extension. Unknown losses must remain unknown in customer design and must not silently become zero.

A negative calculated gauge pressure does not by itself prove that a single-phase water solution is physically possible. Absolute pressure and the fluid state require a separate check.

Worked example

For an illustrative example with water density 1000 kg/m³, equal elevation, inlet pressure 300,000 Pa, inlet velocity 1 m/s and outlet velocity 2 m/s, the ideal equation gives an outlet pressure of 298,500 Pa. That change is caused by the velocity term and is not a friction loss.

Evidence

The equation and limitations are supported by checked government and university engineering material. The exact original historical equation location has not been verified, so this page relies on the checked modern form.

Related Irri Hub guides