Which Dripline Do I Need?

Choose dripline by where it will be installed, the spacing required and the available pressure and flow. This guide gives you a practical starting point before you order.

Dripline laid out around planting in a domestic garden bed
Dripline positioned around individual plants in a domestic bed before the layout is covered and commissioned.

Start with the installation

  • Surface dripline: useful where the pipe can remain visible or be covered with mulch.
  • Subsurface dripline: designed for buried applications and should be selected with suitable filtration, air management and flushing arrangements.
  • Micro irrigation: useful where individual plants or containers need separate outlets.

Check these five details

  1. Total length of every lateral.
  2. Emitter spacing and output.
  3. Available flow and pressure.
  4. Water quality and filtration.
  5. Whether zones can be flushed and serviced.

Do not select dripline by pipe diameter alone. Long runs, slopes and too many emitters on one zone can cause uneven watering. Divide larger systems into sensible zones and follow the manufacturer's limits.

What normally completes the system?

Allow for a filter, pressure regulation where required, control valve, compatible fittings, end-flush points and suitable pipe from the water source.

If you are unsure, email the site dimensions, water-source details and photographs to office@jkirrigation.co.uk.

Match the dripline to the soil and planting

Emitter spacing is only one part of coverage. Water moves differently through sand, loam and clay, so consider the wetting pattern, plant spacing, rooting depth, slope and the distance between dripline rows. A closer layout is not automatically better if the soil cannot absorb the application rate.

Lay out the zone before choosing a coil

  • Draw the planting area and show slopes, narrow sections, trees and hard edges.
  • Choose end-fed, centre-fed, looped or manifold-fed laterals within the exact product limits.
  • Keep lateral lengths reasonably balanced where practical.
  • Calculate emitter count and total zone flow from the selected spacing and emitter output.
  • Check the manufacturer's maximum lateral length at the proposed pressure and terrain.

Plan the control zone and maintenance points

A dependable drip zone normally needs isolation, a compatible valve, filtration, pressure regulation where specified, and accessible flushing points. Subsurface layouts may also require air or vacuum relief at high points. Select those components from the dripline manufacturer's current requirements and the actual water quality, not from pipe size alone.

Before ordering

  • Confirm whether the exact product is approved for surface, under-mulch or subsurface use.
  • Confirm emitter output, spacing, operating-pressure range and filtration requirement.
  • Check connector compatibility. Similar-looking drip tube sizes are not necessarily interchangeable.
  • Allow for headers, fittings, stakes or burial method, flush fittings and repairs.
  • Keep sprinklers and dripline on separate zones unless a competent design proves compatible application and pressure.

Compare current dripline formats

These live products illustrate surface, subsurface and pressure-compensating formats. They are not interchangeable: use the exact technical data for maximum lateral length, pressure range, filtration, flushing, air management, burial approval and connector system.

Coil of Rain Bird XFD above-ground dripline

Surface-dripline example

Rain Bird XFD Above Ground Dripline

Example: SKU X44252 is the 16 mm, 33 cm spacing, 1.6 L/h, 100 m option. Other flow and coil variants are on the product page.

Compare Rain Bird XFD dripline options

Coil of Rain Bird XFS subsurface dripline

Subsurface-dripline example

Rain Bird XFS Subsurface Dripline

Example: SKU X48301 is the 16 mm, 33 cm spacing, 1.6 L/h, 100 m option. Subsurface design still requires the complete manufacturer method.

Compare Rain Bird XFS dripline options

Coil of Netafim UniTechline AS 16 mm pressure-compensating dripline

Pressure-compensating example

Netafim UniTechline AS 16 mm Dripline

Catalogue reference SKU 14690-002500, with 1.6 L/h emitters at 30 cm spacing in a 100 m coil. Use current manufacturer data to check the permitted layout, operating pressure and filtration.

View the Netafim UniTechline example

See currently available drip pipe and fittings ยท See dripline installation tools

Related Irri Hub guides