Infiltration rate is the rate at which water enters the soil surface. It is not a permanent property or a promise that water will spread evenly below ground.
Simple field observation
- Select representative dry and damp areas.
- Apply a known shallow depth over a measured area without creating a jet.
- Record when ponding or runoff begins.
- After resting, inspect moisture depth and sideways movement.
- Repeat rather than relying on one spot.
Why results vary
Surface crusting, slope, vegetation, thatch, compaction, antecedent moisture and biological channels can dominate the result. A ring test may help comparisons, but disturbed soil or poor sealing can mislead.
Match the irrigation system
Keep the effective application rate below the sustainable intake rate for the condition being irrigated. If sprinklers apply faster than the soil accepts water, shorten cycles and add soak periods. For drip, check whether emitters form connected wetting patterns without surface escape.
Related Irri Hub guides
Use this safely
This guide supports irrigation planning and observation. It does not replace a site-specific agronomic assessment, current product instructions, an abstraction licence, or professional advice where crop value, public safety or environmental risk is significant. Record whether figures are measured, estimated or taken from a published source.
Core sources
- FAO Irrigation and Drainage Paper 56: Crop evapotranspiration
- AHDB: Soil health and water supply
- RHS: Watering plants wisely
- Environment Agency: Manage water on land (England; check the regulator for the relevant UK nation)