Evapotranspiration combines evaporation from surfaces with transpiration through plants.
Reference and actual use
Reference evapotranspiration, ETo, describes a defined reference surface under measured weather. Crop evapotranspiration, ETc, adapts that reference for a crop or vegetation condition. Actual water use can be lower under stress or incomplete cover.
Weather drivers
Radiation, air temperature, humidity and wind all matter. Temperature alone is not a complete physical description. Use a traceable local weather source and state its location, period and calculation method.
Millimetres become volume
One millimetre over one square metre equals one litre. An ET estimate of 4 mm over 500 m² represents 2,000 litres of water depth before accounting for rainfall, soil storage and irrigation efficiency.
Related Irri Hub guides
Use this safely
This guide supports irrigation planning and observation. It does not replace a site-specific agronomic assessment, current product instructions, an abstraction licence, or professional advice where crop value, public safety or environmental risk is significant. Record whether figures are measured, estimated or taken from a published source.
Core sources
- FAO Irrigation and Drainage Paper 56: Crop evapotranspiration
- AHDB: Soil health and water supply
- RHS: Watering plants wisely
- Environment Agency: Manage water on land (England; check the regulator for the relevant UK nation)