Find answers to common questions about irrigation, ordering and technical support. For help with your own system, send photographs, measurements and product details.
Pump basics: start here
New to pumps? Start with the water you have and what you want to water. You may not need a pump at all.
Do I need a pump to run dripline in my garden?
Not necessarily. A suitable outside tap can supply dripline if it provides enough water at the pressure the dripline needs. A pump is considered when your source or supply cannot do that job.
Can a water pump run a garden sprinkler?
Yes, if it supplies the sprinkler's required amount of water at the required pressure. Tell us which sprinkler you have and where the water comes from; not every pump can run every sprinkler.
What does a garden water pump actually do?
It moves water and provides a push so water can travel through pipes and watering equipment. It needs a water source and a suitable power arrangement; it does not make extra water.
Will a pump make an empty water butt useful for watering?
No. The butt needs usable water in it first. A pump can move stored water but cannot replace missing rainfall or refill the tank unless another properly arranged supply provides that water.
What is the first question to answer before shopping for a garden pump?
Where will the water come from? Next say what you want to run and how far and high the water must travel. Those basics help establish whether you need a pump at all.
Does self-priming mean I never have to put any water in the pump?
No. Many self-priming surface pumps still need their first water fill and the correct intake arrangement. Follow the exact instructions; the name does not mean it is safe to start an empty pump.
What does manual operation mean on a water pump?
You control starting and stopping, according to the equipment's instructions. Do not assume a manually switched pump will stop when you close the hose nozzle or when the tank runs out of water.
What is a submersible pump in everyday language?
It is a pump designed to work in the water, within its stated installation limits. Some move water out of flooded areas, while others supply irrigation pressure; being submersible does not tell you which job it can do.
Can I put a normal garden pump between my outside tap and hose?
Do not assume that is suitable. Pumping from a mains water supply needs the right equipment and an appropriate installation; ask us or a competent installer to assess it before connecting a pump to the tap.
What sort of pump would I need for watering from a water butt?
Usually you would compare suitable rainwater pressure pumps or a purpose-made small watering system. The choice depends on what you want to run, the available water and the route; a basic drainage pump may not provide enough push.
Do four drippers marked 2 litres per hour need 8 litres per minute?
No. Together they use 8 litres per hour at their stated operating conditions, about 0.13 litres per minute. That is a very small demand, so check the pump and controls can handle it.
Can I use a big irrigation pump for a single hanging-basket dripper?
Do not assume it will operate properly at such a small demand. A purpose-suited small system may be more appropriate; check the pump's minimum-flow and control requirements before using it for one dripper.
Getting started with dripline
What is dripline?
Dripline is watering pipe with small outlets, called emitters or drippers, built into it at regular intervals. It releases water along the pipe near your plants. It is commonly used for hedges and planted beds. Choose the emitter spacing and output for the planting and soil, and check that your water supply can run the planned layout.
Is plain black irrigation pipe the same as dripline?
No. Plain supply pipe carries water to the watering area; it does not have drippers built into it. Dripline has emitters that release water along the run. Check the product description before buying: colour and a similar pipe diameter do not tell you whether the pipe will water plants.
How much dripline do I need for a bed or hedge?
Sketch the planted area and mark every length of dripline you plan to install, then add those lengths together. For example, five rows that are each 10 metres long need 50 metres of dripline, plus the separate supply pipe and connections. The right number of rows depends on the planting and soil. Check each run against the exact product’s maximum length before choosing a coil.
Does 30 cm emitter spacing mean my rows must be 30 cm apart?
No. Emitter spacing is the distance between drippers along one length of pipe. Row spacing is the distance between separate lengths laid across a bed. Choose the row layout for your plants and how water spreads through the soil, then check the total water demand.
Can I lay a whole 100 metre coil as one continuous run?
The amount on the coil is the quantity you buy, not a promise that it will work as one long run. The permitted run length depends on the exact dripline, dripper output and spacing, inlet pressure and slope. Some layouts need shorter branches fed from a supply pipe. Check the manufacturer’s table for your chosen product.
Is 1.6 litres per hour the flow from the whole coil?
If 1.6 litres per hour is the stated emitter output, it means the output from each dripper. Approximate total flow is the number of drippers multiplied by their individual output. For example, 100 metres with 33 cm spacing and 1.6 litre-per-hour drippers needs roughly 485 litres per hour. This is an estimate; also check pressure, slope, branch demand and the product’s permitted run length.
What else do I need besides the dripline coil?
A typical system also needs a water supply connection, suitable supply pipe, a way to turn the water on and off, the specified filter, pressure regulation where required, matching fittings and a way to flush the ends. A timer is useful for automatic watering. Check the contents of any kit before ordering, and check the additional requirements for a buried layout.
Can I bury dripline to keep it out of sight?
Only use a dripline that the manufacturer approves for the installation you want. A line intended for surface use is not automatically suitable for burial. Buried systems also need the correct filtration, flushing and air-management arrangement. Check the exact model and installation instructions before covering it.
How do I identify the correct replacement part?
Start with the manufacturer, model, printed markings, connection type and accurate measurements. For pipe and fittings, measure the outside diameter. Do not rely only on colour or a photograph. See what to send for technical help.
Do metric and imperial fittings connect?
Not directly in most cases. They are separate size families. Use a purpose-made adaptor and verify both sides before ordering. See Metric or imperial PVC?
How do I choose an irrigation pump?
Provide the required flow and pressure, source type, lift, pipe length and diameter, elevation, water quality, electrical supply and control method. Motor power alone is not enough. See Which irrigation pump do I need?
Why is my irrigation pressure low?
Possible causes include low source capacity, excessive zone demand, undersized pipe, dirty filters, partly closed valves, elevation or leakage. Measure both static and running pressure. See the pressure-loss guide.
Do I need both a filter and pressure regulator?
They do different jobs. A filter removes particles; a regulator controls downstream pressure within its operating range. Many drip and micro systems require both. See filters and regulators explained.
How quickly are in-stock items dispatched?
Check the delivery estimate at checkout. Common in-stock items ordered before midday are generally sent on a next-working-day service, although this is not guaranteed. Specialist, pre-order and larger goods may take longer. See Delivery Information.
Can I collect my order?
Where collection is offered, collect from the building marked UK Flow Centre, Dryhill Lane, Sundridge, Kent TN14 6AA. The counter is open Monday to Friday, 7am to 5pm. Wait for ready-for-collection confirmation for an online order. Walk-in counter purchases are also welcome during opening hours. See Collection and Trade Counter.
Can I return an item?
Eligible standard-stock goods have an additional 30-day return offer subject to its conditions. Consumer cancellation and faulty-goods rights apply separately. Special sourcing alone does not remove a consumer's legal cancellation right. See Returns and Refunds; for courses, see Training Booking Terms.
What is a pro-forma order?
It allows an organisation to receive order and payment information before paying. Goods are released after cleared payment. It is not a credit account. See Pro-forma Orders.
Does adding a purchase-order number give me credit?
No. A PO number is a customer reference. Deferred payment is available only where JK Irrigation Ltd has confirmed credit terms in writing. See Purchase Orders.
What is the difference between an online, trade and credit account?
Our approved pricing tiers are Trade, Trade Plus and Trade Partner. Savings vary by eligible product and range. Sign in with the email approved for your tier to see your prices and savings in pounds where applicable. A normal website login does not activate trade pricing, and trade approval does not grant credit. Read about the tiers and apply.
A credit account additionally requires written agreement on payment terms and a limit. See Business Ordering and Accounts.
How do I use lists, quotes and projects?
Build a parts list, group lists into projects and save a quotation enquiry with its own items and quantities. When signed in, your workspace saves to your account automatically; check the account-saving status. Guest work stays in that browser until you choose Bring my guest lists into this account. Transfer codes remain available for sharing, backup and import.
To ask us for a price, choose Request this quotation, review the details and complete the website submission. Email, WhatsApp and copy options are also available. Saving an enquiry or changing its tracking label does not send it, reserve stock or place an order. Read the workspace guide or open Your Workspace.
Can these guides replace an irrigation design?
Our guides explain common questions and help you prepare the information needed for a job. They do not replace a site survey, formal design, product instructions or a suitably qualified installer. Ask a competent person about safety-critical or site-specific decisions.
How do I get human technical help?
Email office@jkirrigation.co.uk with the product details, measurements, readings, photographs and a clear description of the problem. Email is preferred because it keeps the technical information together.
What is the difference between static and dynamic pressure?
Static pressure is measured when no water is flowing. Dynamic pressure is measured at a stated flow and is the more useful design value. A high static reading can still collapse when a zone operates, so record pressure and flow together where possible.
Can sprinklers and dripline run on the same zone?
Usually they should be separated because the required pressure, filtration, application rate and run time differ. Combining them is acceptable only where a competent design and the product data show that every outlet will operate correctly together.
Is a check valve enough for irrigation backflow protection?
Not automatically. UK requirements depend on the water source, contamination risk and installation. Ask the local water undertaker what protection and notification are required. Do not assume an irrigation valve, trigger nozzle or generic non-return valve is compliant backflow protection.
Why does a valve work manually but not from the controller?
The hydraulic side may be working while the electrical command is not. Check programming, sensor status, controller output, common and station wiring, field joints, solenoid type and voltage. Isolate equipment and use a competent person for electrical testing.
Why do low sprinklers leak after a zone stops?
Water stored in higher pipework can drain through the lowest outlet for a short period. Flow that continues can indicate a valve that is not closing fully or another fault. Observe whether it stops after the lateral has drained.
Related guides
Do trade savings combine with box-quantity offers?
Offers have their own eligibility and combination rules. Trade savings and promotions do not automatically add together. Check the discounts and final total at checkout, and ask us before ordering if an expected price is missing. See trade information.
What does POA mean?
Price on Application means we need to quote the item individually. Add it to an enquiry and send the required size, quantity and delivery details. Saving it in a list does not fix a price or reserve stock.