Safety status: Recognition guidance only. Never touch, connect, disconnect or test a conductor solely because of its colour. Isolate securely and use a competent person.
UK fixed-wiring colours changed in 2004 to harmonised colours. Irrigation sites may contain old wiring, new wiring, imported equipment, control cables and later alterations in the same installation.
Common single-phase colours
| Function | Older UK colour | Current harmonised colour |
|---|---|---|
| Line or live | Red | Brown |
| Neutral | Black | Blue |
| Protective conductor | Green/yellow in later old installations; older systems may differ | Green/yellow |
Common three-phase colours
| Function | Older UK colour | Current harmonised colour |
|---|---|---|
| Line 1 | Red | Brown |
| Line 2 | Yellow | Black |
| Line 3 | Blue | Grey |
| Neutral, where present | Black | Blue |
| Protective conductor | Green/yellow in later old installations; older systems may differ | Green/yellow |
The dangerous colour conflicts
Black can be an old neutral or a current three-phase line conductor. Blue can be an old phase conductor or a current neutral. This is why colour is not proof of function. Mixed-colour installations require appropriate identification and competent verification.
Irrigation control cables are different
Multicore valve, decoder, signal and extra-low-voltage control cables may use colours merely to distinguish cores. Those colours do not automatically carry the fixed-wiring meanings above. Use the wiring diagram, terminal identification, cable schedule and verified tests for the actual system.
Safe information for technical support
- Do not remove covers or expose conductors for a photograph.
- Record equipment manufacturer and model.
- Photograph external labels and safe visible cable markings.
- State whether the installation is known to be single-phase, three-phase or extra-low voltage.
- Provide test results only when obtained by a competent person.
Related Irri Hub guides
- 230 V and 400 V irrigation supplies
- Controller programming and rain sensors
- Valve will not open or close
- What to send for technical help
Sources and limitations
The Health and Safety Executive confirms that British wiring colours changed in 2004 and warns never to assume voltage from colour. Current work should follow BS 7671 and be carried out by a competent person. Historical installations may contain other colours, re-identification or errors.