Best for: Designers, maintainers and users protecting pumps, valves, sprinklers and drip emitters supplied from harvested rainwater.
Harvested rainwater is not automatically clean. Water Regs UK advises that contamination from the atmosphere, roof and animal or bird fouling must be assumed. The required controls depend on collection surface, storage, irrigation equipment, exposure route and intended use.
Control contamination before the tank
- Inspect the roof and exclude unsuitable collection surfaces.
- Keep gutters clear and prevent contaminated drainage entering the system.
- Use leaf guards or inlet screening appropriate to the site.
- Provide first-flush or diversion measures where the design requires them.
- Prevent insects, rodents and surface water entering the tank.
Good storage design
Keep the tank covered and opaque to limit light and algae. Provide screened ventilation, a suitable overflow, access for inspection and a means to manage sediment. Locate the draw-off to avoid both floating debris and settled material where practical.
Filtration is a staged process
Coarse pre-tank screening protects storage. Pump-side protection keeps larger debris away from the pump. Final filtration should be selected from the smallest passage in the downstream equipment and the manufacturer's stated water-quality requirement. A filter described only by mesh number is not enough without its actual opening size and flow-performance data.
Pressure loss and maintenance
Filters add pressure loss, which increases as they load with debris. Include clean and dirty pressure loss in the hydraulic design. Provide pressure measurement or another maintenance indicator where appropriate, and ensure the filter can be isolated, opened and cleaned safely.
Dripline and sprinkler considerations
Drip emitters are normally more sensitive to fine particles and biological growth than large sprinkler nozzles. Small nozzles, regulating devices and solenoid-valve pilot passages can also block. Follow the most restrictive manufacturer's requirement on the operating zone.
Health and use limitations
Do not label harvested rainwater as potable. Consider aerosols, public access, edible crops and vulnerable users in the risk assessment. Treatment that protects irrigation equipment does not automatically make water suitable for drinking or personal hygiene.
What to record
- Source and collection surface.
- Filter make, model and element rating.
- Clean and service pressure readings.
- Cleaning frequency and observed contamination.
- Tank inspection and cleaning history.
- Any laboratory results and sampling conditions.
Related Irri Hub guides
- Rainwater harvesting overview
- Filters and pressure regulators
- Dripline design
- Filter pressure losses
Sources and limitations
See Water Regs UK's alternative-water guide and BS EN 16941-1:2024. Product and site requirements take priority. This page is not a microbiological risk assessment or approval for a particular end use.