Irrigation should wet the active root zone, not an assumed depth copied from a generic table.
Find the effective depth
Inspect several representative locations with an auger, core or careful excavation. Record the depth containing most active fine roots and any restriction from compaction, rock, drainage, containers or construction layers.
New planting and established planting
A new tree may have a compact rootball while the eventual rooting area is much larger. Newly seeded turf has a shallow vulnerable layer. Establishment irrigation must follow the roots as they extend, rather than remaining permanently shallow and frequent.
Check the wetting depth
After a measured irrigation, inspect beneath the surface. Water below the active roots may be drainage rather than useful storage. A dry layer within the roots indicates insufficient depth, poor distribution or a hydraulic discontinuity.
Related Irri Hub guides
Use this safely
This guide supports irrigation planning and observation. It does not replace a site-specific agronomic assessment, current product instructions, an abstraction licence, or professional advice where crop value, public safety or environmental risk is significant. Record whether figures are measured, estimated or taken from a published source.
Core sources
- FAO Irrigation and Drainage Paper 56: Crop evapotranspiration
- AHDB: Soil health and water supply
- RHS: Watering plants wisely
- Environment Agency: Manage water on land (England; check the regulator for the relevant UK nation)