Soil-Moisture Deficit for Irrigation Scheduling

Soil-moisture deficit is the amount of water needed to return a defined soil profile to its chosen upper reference condition.

Keep the boundary explicit

State the area, profile depth and upper reference. A deficit for the top 200 mm is not the same record as one for a 600 mm root zone. Millimetres of deficit equal litres per square metre.

Daily balance

New deficit = previous deficit + crop water use − effective rainfall − net irrigation.

Add or subtract other flows only where evidence supports them. Cap the balance at the defined soil-store limits rather than allowing impossible negative or unlimited values.

Reset with evidence

Rainfall does not automatically reset the deficit. Some runs off, remains on foliage or drains below the profile. Reconcile the calculated balance with soil measurements and plant condition.

Related Irri Hub guides

Use this safely

This guide supports irrigation planning and observation. It does not replace a site-specific agronomic assessment, current product instructions, an abstraction licence, or professional advice where crop value, public safety or environmental risk is significant. Record whether figures are measured, estimated or taken from a published source.

Core sources

Return to Irri Hub