Filter connection size is not its hydraulic capacity. Sizing must cover the required filtration grade, maximum flow, allowable pressure loss and the dirt load between cleaning events.
Inputs
- Maximum simultaneous irrigation flow in L/min or m³/h.
- Backwash flow and whether irrigation continues during cleaning.
- Minimum inlet pressure, maximum static/surge pressure and permitted downstream pressure variation.
- Required micron grade from the most sensitive downstream passage.
- Seasonal suspended solids, algae, sand and precipitated mineral loading.
Differential-pressure worked check
Differential pressure is upstream pressure minus downstream pressure at the same flow. If upstream is 3.2 bar and downstream is 2.7 bar, the differential is 3.2 − 2.7 = 0.5 bar. Compare that value with the manufacturer's clean baseline and cleaning limit. A number without flow is ambiguous because filter loss rises as flow rises.
Backwash-flow check
If irrigation demand is 90 L/min and a filter bank needs 35 L/min of additional water while one vessel backwashes, a simultaneous source may need 90 + 35 = 125 L/min at the required pressure. If the source cannot provide it, the design must sequence or interrupt irrigation according to an engineered control method.
Commissioning
- Verify gauge zero and location.
- Record clean loss at several representative flows.
- Prove the cleaning trigger, duration and return to clean pressure loss.
- Confirm downstream pressure remains adequate during any continuing irrigation.
- Inspect for bypass, element damage and unsafe discharge.
Filter and service-hardware examples
These examples show a filter and a separate flushing component. Neither product removes the need for a pressure-loss curve, clean baseline, cleaning limit, safe isolation and a managed discharge route.

Disc-filter example
Azud Modular 100 Inline Disc Filter
Catalogue reference SKU 7033257. The listed connection and 130 micron grade do not by themselves prove sufficient flow capacity or emitter protection.

Filter-service example
Amiad Filter-Flushing Ball Valve
Catalogue reference SKU AMFILVALVE020. It is a service component, not a filter; confirm connection, pressure, material and discharge arrangements for the exact filter installation.
See currently available drip and filtration components · Return to filter and regulator selection
Rain Bird's filter sizing data shows that permissible flow depends on screen grade and area. Use only the curve for the exact model.
Safety boundary: isolate and depressurise before servicing. Differential pressure can indicate blockage but not prove safe vessel condition.
Assumption and limitation: the examples illustrate arithmetic, not universal alarm values. Dirt capacity and cleaning limits are manufacturer-specific.
Related: automatic backwashing and minor pressure losses.
Browse by brand Rain Bird