Dry areas are evidence of a pattern, pressure, nozzle, obstruction, zoning or scheduling problem, not automatically a need for longer run time.
Read the pattern
Dry rings, wedges, isolated shadows and weak zone ends suggest different causes. Mark the symptoms on the plan and inspect arcs, rotation, radius, nozzle condition and obstructions.
Measure before changing
Check dynamic pressure, zone flow and catch-can depths. Compare installed spacing and nozzle schedules with the approved design and current product data.
Correct the cause
Clean or replace compatible parts, restore pressure, correct arcs or revise spacing and zoning. Avoid enlarging nozzles without recalculating total flow and hydraulics.
Related Irri Hub guides
Design boundary
This is general UK-oriented irrigation guidance, not a site design or a substitute for the selected manufacturer’s current data. Confirm measured dynamic pressure, available flow, levels, water quality, soil, planting and local requirements. Do not mix figures from different product families. Electrical work and contaminated or non-potable water require the appropriate competent assessment.
Browse by brand Rain Bird · Hunter · Netafim