Pressure Variation Along Sprinkler Laterals

A sprinkler lateral loses flow through successive outlets, so full-flow pipe loss must not simply be applied along its entire length.

Distributed flow

Flow is highest at the lateral inlet and reduces after every operating sprinkler. Use a recognised multiple-outlet method or suitable design software and state the method used.

Pressure and discharge

For many turbulent outlets, discharge changes approximately with the square root of pressure. Even modest pressure variation can affect flow, radius and uniformity. Pressure-regulated devices still have operating limits.

Check the least-favoured outlet

Combine friction, elevation and component losses. Measure representative points during commissioning and compare the actual values with the design schedule.

Related Irri Hub guides

Design boundary

This is general UK-oriented irrigation guidance, not a site design or a substitute for the selected manufacturer’s current data. Confirm measured dynamic pressure, available flow, levels, water quality, soil, planting and local requirements. Do not mix figures from different product families. Electrical work and contaminated or non-potable water require the appropriate competent assessment.

Browse by brand Rain Bird · Hunter · Netafim

Technical sources

Return to Irri Hub