Square and Triangular Sprinkler Layouts

Square and triangular layouts create different overlap geometry and should be selected deliberately.

Square layout

Square grids are straightforward beside rectangular boundaries but their diagonal is longer than the side spacing. Wind and marginal radius can expose weak areas near the centre of four sprinklers.

Triangular layout

Equilateral triangular positioning can improve overlap and suit open areas, but boundary detailing and row offsets need careful setting out. Do not combine geometry rules casually at transitions.

Irregular edges

Design the perimeter separately using part-circle or strip patterns, then connect it to the chosen interior grid. Mark dimensions and nozzle arcs on the drawing so the installer is not forced to improvise.

Related Irri Hub guides

Design boundary

This is general UK-oriented irrigation guidance, not a site design or a substitute for the selected manufacturer’s current data. Confirm measured dynamic pressure, available flow, levels, water quality, soil, planting and local requirements. Do not mix figures from different product families. Electrical work and contaminated or non-potable water require the appropriate competent assessment.

Browse by brand Rain Bird · Hunter · Netafim

Technical sources

Return to Irri Hub