Best for: Readers checking what a calculation or page verification result does and does not establish.
Verification can show that an exact revision reproduces stated results or handles specified inputs correctly. It does not establish independent technical approval, product compatibility or suitability for a particular site.
What a useful verification record includes
- The exact method, dataset or page revision checked.
- The inputs, units, expected result and permitted tolerance.
- The actual result, any failed checks and the action taken.
- The checker, date and scope of the check.
Different checks answer different questions
- Numerical checks reproduce arithmetic against stated examples.
- Input checks confirm that missing, incompatible or out-of-range values are handled safely.
- Structural checks confirm that records and references are connected as intended.
- Page checks cover presentation, links, devices and accessibility.
- Independent technical review considers the engineering method, evidence and limits.
What verification does not prove
A passing check does not prove site suitability, product compatibility, regulatory compliance or safe installation. Use measured operating conditions, current manufacturer information and competent professional advice where the work requires it.
Arithmetic research checks
A separate calculation audit reproduced the connected teaching example and two constructed Colebrook roots, plus the fixed-factor straight-pipe example. It also reproduced the eleven simplified viscosity verification values to their printed precision. These checks cover isolated arithmetic. They do not verify a deployed tool’s input validation, a complete hydraulic chain, product data or site suitability.
NRCS worked-example comparisons
On 16 October 2026, an isolated calculation check used the stated US-customary inputs in NRCS NEH Part 634, Chapter 4, section 634.0403, printed page 634-4.9. The chapter's Swamee-Jain friction-factor approximation and Darcy-Weisbach method were used. The results were:
| Check | Printed result | Recomputed result | Difference |
|---|---|---|---|
| Example 4-7: head loss | 8.86 ft | 8.8815 ft | About 0.24% |
| Example 4-8: discharge at 15 ft head loss | 2.68 ft³/s | 2.6850 ft³/s | About 0.18% |
Both results were within a 0.25% comparison tolerance of the printed values, consistent with displayed rounding. These are source-reading and isolated arithmetic checks in the source's units. They do not verify a deployed tool, metric conversion, input validation, an installed pipe or independent engineering approval. The exact source is S46 in Technical Sources.
Current limitations
Some methods have recorded arithmetic and input checks, but named independent formula and unit review, approval of product-specific data, full rendered accessibility checks and independent technical approval remain outstanding where stated.