Sensor-led scheduling works best when instruments, thresholds, irrigation events and field observations form one controlled record.
Use more than a start threshold
A shallow sensor may indicate when drying begins; a deeper sensor can show whether irrigation reaches, or drains beyond, the intended root zone. Combine the trend with rainfall, runtime and plant condition.
Commission the logic
- Verify sensor identity and displayed units.
- Record placement and installation method.
- Wet and observe the profile.
- Watch a controlled drying period.
- Set provisional alert and stop thresholds.
- Test the controller response and fail-safe state.
Recognise bad data
Flat lines, abrupt steps, implausible responses or disagreement with nearby observations can indicate poor contact, cable damage, air gaps, salinity effects or configuration errors. Do not automate from unverified data.
Related Irri Hub guides
Use this safely
This guide supports irrigation planning and observation. It does not replace a site-specific agronomic assessment, current product instructions, an abstraction licence, or professional advice where crop value, public safety or environmental risk is significant. Record whether figures are measured, estimated or taken from a published source.
Core sources
- FAO Irrigation and Drainage Paper 56: Crop evapotranspiration
- AHDB: Soil health and water supply
- RHS: Watering plants wisely
- Environment Agency: Manage water on land (England; check the regulator for the relevant UK nation)